OSD Audio - Nero XMAX2 Reference Class A/B Stereo Power Amplifier, 600W x2 at 8 Ohms, XLR and USB-C DAC - Black
Reviews coming soon
About this product
The Nero XMAX2 is a reference-grade Class A/B stereo power amplifier built for two-channel and high-output home theater systems. A 2000VA toroidal transformer and 200,000uF audio-grade capacitor bank feed a fully discrete high-current output stage rated at 600W RMS per channel into 8 ohms and 1000W RMS per channel into 4 ohms, both channels driven at 1% THD, or 1800W bridged into 8 ohms for monoblock configurations. Peak output current reaches 22 amps per channel with 16 amps continuous, and the amplifier supports continuous 4-ohm operation. Connectivity covers balanced XLR, unbalanced RCA and a USB-C input with built-in DAC supporting PCM up to 32-bit/192kHz with no drivers required. Selectable 23dB or 29dB gain matches streaming preamps through reference balanced sources. A 12mm machined aluminum front panel carries an illuminated analog VU meter, and a full protection suite uses a resettable 20A breaker instead of replaceable fuses. Backed by a 5-year warranty.
Features
600W x2 at 8 Ohms, Both Channels Driven
Rated output is 600W RMS per channel into 8 ohms and 1000W RMS per channel into 4 ohms at 1% THD with both channels driven, or 550W and 880W respectively at 0.1% THD. Bridged mono operation delivers 1800W RMS into 8 ohms. These are honest both-channels figures, not single-channel measurements.
High-Current Discrete Class A/B Output Stage
Five complementary NJW0281G/NJW0302G pairs per channel provide 22 amps peak and 16 amps continuous output current, with continuous 4-ohm operation supported. Damping factor exceeds 500 at 8 ohms for tight control over demanding low-impedance speakers and difficult crossover loads.
2000VA Toroidal and 200,000uF Capacitor Bank
The OSD PowerCore 2000VA toroidal transformer works with a ReserveCap 200,000uF audio-grade capacitor bank to store the energy needed for dynamic peaks. The result is unwavering voltage under load, so transients arrive with full force instead of sagging as the power supply runs out of reserve.
Balanced XLR, RCA and Built-In USB-C DAC
Two balanced XLR and two unbalanced RCA inputs feed a rear-panel input selector, and a USB-C input with built-in DAC handles PCM up to 32-bit/192kHz as a driverless plug-and-play connection. Selectable 29dB or 23dB gain matches everything from streaming preamps to reference balanced sources.
Reference Measurements, VU Meter, 5-Year Warranty
Signal-to-noise ratio measures 117dB at rated power A-weighted, THD+N is 0.008% at 100W, and frequency response spans 10Hz to 50kHz within 0.5dB. A 12mm brushed anodized aluminum front panel carries an illuminated analog power meter. Protection covers DC, over-current, thermal and short circuit with a resettable 20A breaker.
Specifications
- Continuous Watts x Channel @ Ohms600W x 2 @ 8 Ohms; 1000W x 2 @ 4 Ohms, both channels drivenNumber of Channels2Number of Audio Zones1Network Connector(s)No network connectors
Reviews
This product doesn't have any reviews yet.
Compare similar products

The Nero XMAX2 is a reference-grade Class A/B stereo power amplifier built for two-channel and high-output home theater systems. A 2000VA toroidal transformer and 200,000uF audio-grade capacitor bank feed a fully discrete high-current output stage rated at 600W RMS per channel into 8 ohms and 1000W RMS per channel into 4 ohms, both channels driven at 1% THD, or 1800W bridged into 8 ohms for monoblock configurations. Peak output current reaches 22 amps per channel with 16 amps continuous, and the amplifier supports continuous 4-ohm operation. Connectivity covers balanced XLR, unbalanced RCA and a USB-C input with built-in DAC supporting PCM up to 32-bit/192kHz with no drivers required. Selectable 23dB or 29dB gain matches streaming preamps through reference balanced sources. A 12mm machined aluminum front panel carries an illuminated analog VU meter, and a full protection suite uses a resettable 20A breaker instead of replaceable fuses. Backed by a 5-year warranty.

Born from 80 years of Japanese audio craftsmanship, the Onkyo Muse Y-40 is an elegant 150W hi-fi centerpiece that blends timeless design, smart innovation, and effortless connectivity.

The inspiring Onkyo Muse Y-50 fuses 80 years of Japanese audio expertise into an elegant, 250W hi-fi hub with premium design, smart features, and versatile connectivity.

The HTA7200 can easily achieve the reference cinema sound levels of 105dB from all channels. The HTA7200 is rated at 210 Watts per channel, all channels driven (not just one channel, as stated by most competitors) into 4Ohms. Used with typical speakers this allows for a sound-pressure level of 112-115dB, 7-10dB more than required for reference sound levels. The additional dB’s means the amplifier is working well within its normal range, and this keeps the distortion low. (A good example of this is turning your TV up too much - it does not sound good. This is because the closer you get to full power the higher the distortion.) With this amplifier at 105dB, the distortion is below 0.01%.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.























































