1-10 of 11 Answers
My instructions were sandwiched inside the cardboard backing of the package. Here is a quick overview for Windows computers: 1. Plug the card reader into a USB port on the computer. The driver will install automatically. 2. Plug the card into the appropriate slot (SD cards go in label up, MicroSD cards go in label down). The blue LED lights. (The LED is to the right of the card slots) 3. Access the files using normal Windows procedures. 4. When done, eject the card thru Windows (don't just pull it out). Do not remove the card if the blue LED is still flashing. If the LED is not flashing, pull the card and the LED will then go off. Hope this helps!
Sorry, there was a problem. Please try again later.The manual is available through the InsigniaProducts.com website by searching your Card Reader model # and selecting the Support/Downloads tab below the product picture.
Sorry, there was a problem. Please try again later.Doesn't come with instructions, but very easy to use. Just stick card reader into USB port and then insert the card into the reader. Then call up the pictures on the card using whatever software you have loaded for pics.
Sorry, there was a problem. Please try again later.I don't still have any materials that came with the reader, if that is the focus of your question. But, using the reader is pretty straightforward. It is essentially the physical format of a jump / flash drive - it has a USB connector, and slots for a SD or MMC card, and for a micro SD card. Insert whatever storage medium you are using (SD or micro SD) into a slot on the reader, plug that into a USB port on your computer, and away you go. And, you can't insert a SD or micro SD card the 'wrong' way (unless you simply force the card in incorrectly, in which case you will destroy the card and the reader). If the card doesn't slide in and seat itself, turn it over and it should be fine.
Sorry, there was a problem. Please try again later.There should have instructions included in the box. If it is an SD card you put it into the larger slot label side up in the stick. Then put the stick into your USB port. Select the removable disk in your 'My Computer' and there should be a blue LED light that comes on from the stick. It was hard to see but it is there. Make sure you choose to 'eject disk' from the removable disk before pulling the stick when you are finished. The blue light will go out and then the stock is safe to pull out. If you remove while light is still blue you have a big risk of losing whatever is on your SD card.
Sorry, there was a problem. Please try again later.You insert it into your USB port. And a memory card into a corresponding slot.
Sorry, there was a problem. Please try again later.just insert card and plug into USB slot should open with options, (open folder) and do your thing, if for some reason it doesn't open, pull and plug again, if stiil not try opening thru my computer.
Sorry, there was a problem. Please try again later.Put an SD card into one of the slots on this device, then plug the device into your computer's USB slot.
Sorry, there was a problem. Please try again later.You install it as per instructions that come with the product although mine installed without me having to do anything other than plug it in. You plug in the reader to usb port. plug in SD card to side of reader and should have full access.
Sorry, there was a problem. Please try again later.simply insert the SD card into the slot then place the reader into the USB slot in the computer
Sorry, there was a problem. Please try again later.