A:AnswerPurchased the Kento - Full Motion to free-up table-space and permit viewing from all seats in our family/sitting room. The Best Buy Geek squad set it up onto the wall and covered the extending wires & cables with a cable channel cover. The installation was done professionally and quickly. The scree (40" Samsung) is visible from every corner of the room. When using it myself I am able to shift the angle easily with a touch of one finger. When my partner wishes to watch by herself she finds the Kento as simple to adjust. The children like the idea of not having to lean and bend as family members walk about the room in order to view. The unit has been up for about a month and a half and we are satisfied with performance. The Geek Squad guy also attached the wall brace to a stud behind the drywall and the mounting feels very secure. Initially I hesitated at the proposed cost, but am glad that we proceeded with the purchase. We are receiving more than good value for what it cost. Good luck. Hope this helps.
A:AnswerIf you could please email us directly at [email protected] and pass along your TV's full model number and we would be happy to assist you further with this.
A:AnswerThe M300 comes with a variety of different M6/M8 screws to accommodate different VESA patterns. These range from 12mm to 50mm. If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerIf you could please email us directly at [email protected] and pass along your TV's full model number and we would be happy to determine compatibility for you.
A:AnswerIf you could please email us directly at [email protected] and pass along your TV's full model number and we would be happy to determine compatibility for you!
A:AnswerThe M300 is compatible with a VESA pattern of 100mm x100 and comes with compatible hardware for that VESA pattern. Below is the link to the M300 product page. https://www.kantomounts.com/wp-content/uploads/2020/05/M300-TriManual_20-01-20-linear.pdf
If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerHello, we do recommend drilling new holes for our mounts based on the instructions provided to you in the manual. Please let us know if you have any other questions and we'll be happy to help.
A:AnswerContact us directly using the support button on our website and pass along your TVs full model numbers so we can confirm compatibility, thanks.
A:AnswerPlease get in touch with us directly through the support button on our website, and pass along your TV's full model numbers and we'll be happy to determine compatibility.
A:AnswerIf you can please email us directly through the support button on our website, and pass along the TV's model number we'll be happy to let you know if it will be compatible.
A:Answerbadger, thanks for your question. Your trailer would need either wood, concrete or brick studs so if it does, then it should be okay. Check out the manual on our website to see what steps you would need to take to mount it and if you have any questions, you can click the support button on our website to get in touch with us directly. Cheers.
A:AnswerKyra, Unfortunately, the M300 is not compatible with that model of Insignia TV. If you would like to email us directly at [email protected] we'll be happy to help determine a mount that will work best for your TV.
A:AnswerEdward,
It should work but without knowing the full model number of your TV I cannot be 100% confident. Contact us directly with the model of your TV using the support button on our site and I'll confirm compatibility, thanks.
A:AnswerMadthrash, Curved TV's will mount the same as flat TV's, however I won't be able to be sure about compatibility without the TV's model number. If you can please email us at [email protected] and pass along your TV's model number and we'll be happy to let you know if the M300 is compatible with your TV.
A:Answerfloat46,
I hope you did not listen to the advice posted here yesterday. Your TV will not work with this mount. The maximum VESA pattern (bolt pattern) the M300 can accept is 400x400, but your TV has a bolt pattern of 800x400. According to my research there is a secondary set of bolt holes on this TV at 650x300 but even that exceeds the maximum the M300 can handle. Contact us directly using the support button on our site if you'd like to know some alternatives, talk soon.
A:AnswerRicah, The M300 will work great as a corner mount, however I will need your TV's model number to determine compatibility with your TV. If you contact us through the support button on our website, and pass on your TV's model, we'll be more than happy to let you know if the M300 is compatible.
