“I have this amp and the light comes on but no output is coming out. it was working before and another amp i have still works, what is the possible problem?”
Answer This Question
1-4 of 4 Answers
I have the same issue. Did you find a solution? the amp lights up red light but nothing comes out of the subs.
Sorry, there was a problem. Please try again later.Check your fuses, then check that 12v is getting to the turn-on screw, to tell it to be turned on. If 1 of the 2 fuses is blown it will be harshly imbalanced in the power supply, triggering the protection circuit. If there's no 12v at that third screw, it won't be being told to turn on.
Sorry, there was a problem. Please try again later.If your power light is coming on but no sound, it would have to be an issue with your RCA cables. I would double check everything and make sure they’re plugged in correctly, check that they’re going into input and check the connection in your radio, and if you have an aftermarket, many will have a setting for subwoofers to be turned off. Just check that to make sure. And go over the wiring of your subs just to be safe, make sure they’re all still intact and proper.
Sorry, there was a problem. Please try again later.check all input/output wire connections. check the wires for continuity. check the fuses on the back of the unit. turn up the volume control. make sure the subwoofer has continuity, it won't work w/ a blown speaker. good luck
Sorry, there was a problem. Please try again later.
