A:AnswerIt depends on how your hands free is set up on your Jeep. If you use your current head unit as the hands free interface then the new head unit would just take it’s place and you would have the same hands free functionality. If the hands free capability is built into your Jeep independent of your current head unit I would recommend having Bestbuy install the head unit
A:AnswerHi chris, we recommend contacting a professional installer with regards to this concern. However, here are the approximated dimensions of the unit, it's 178 mm × 100 mm × 141 mm. For more information, please visit the link below:
https://docs.sony.com/release//Manual_4740885111.pdf, see page 21.
Regards, _Bob
A:AnswerHello Brandon, regarding this concern, we recommend contacting a professional installer to properly check it. However, here are the approximated dimensions of the unit, it's 178 mm × 100 mm × 141 mm (w/h/d). For reference, please refer to the link below:
https://docs.sony.com/release//Manual_4740885111.pdf, see page 21.
Regards, _Bob
A:Answeryes, but you'll likely have to get a 3rd party matching faceplate with all the harnesses, adapters, & connectors. Best Buy helped me locate the ones for mine, and then helped me find where the controls are now with the new replacement controls
A:AnswerHello Bulio, regarding this concern, we recommend contacting a professional installer to properly check it. However, here are the approximated dimensions of the unit, it's 7.01"x3.94"x5.55". For reference, please refer to the link below:
https://www.sony.com/electronics/in-car-receivers-players/xav-ax1000/specifications
Regards, _Bob
A:AnswerHi ana, We can't guarantee that it would fit the vehicle. We recommend consulting a professional installer to determine its compatibility. You may use the dimensions below as reference:
-7.01"x3.94"x5.55" (WxHxD)
Regards,
~Ralph
A:AnswerHi cb, we recommend checking with a professional installer in order to determine if this unit will fit your vehicle. You may refer to pages 20 and 27 of this link for your reference: http://146.215.230.18/release//Manual_4740885111.pdf Thanks, -Mark
A:AnswerHello Ron, regarding this concern, we recommend contacting a professional installer to properly check it. However, here are the approximated dimensions of the unit, it's 178 mm × 100 mm × 141 mm. For reference, please refer to the link below:
https://docs.sony.com/release//Manual_4740885111.pdf, see page 21.
Regards, _Bob
A:AnswerIt connects via bluetooth to play music. When the iphone is hooked to the USB it goes to apple car play. It does not lock out the phone in car play mode.
A:AnswerHi Sarah,
Thank you for your inquiry. Because of the number of variables encountered with different makes and models of automobiles, Sony is unable to assist with the installation of car stereo and mobile audio systems. However, if you are using a wiring harness, further information about the wire color and function of each pin on the wiring harness is available. Refer to the following article:
https://www.sony.com/electronics/support/articles/00028631
For best assistance and to confirm the compatibility, please contact the manufacturer's support of your in-car entertainment system.
Note:
Sony recommends that the installation be completed by a professional and qualified installer.
I hope this helps!
Best regards,
Romeo
