A:AnswerHi Mag, Thanks for your inquiry. Yes, you can connect a CD player to one of the RCA audio input jacks of this receiver. However, you will have to connect your speakers directly to the speaker port of this receiver to output the sound. Hope this helps! -Sam
A:AnswerHi Al, thank you for inquiring about the STRDH190. The supported codecs are SBC4 and AAC. With our STR-DH190 Stereo receiver with Bluetooth, you can choose whether you enjoy the warm sound of vinyl via the phono input or stream music from your digital music collection, it'll be a perfect match. Additionally, the receiver’s A or B function lets you connect two pairs of speakers. You can easily switch between A or B or use them all together at the same time. You can check the specification below.
https://www.sony.com/electronics/support/res/manuals/4726/f63b8edb2b154409daa55875111f95e4/47269071M.pdf see page 37.
I hope this helps.
Regards,
Erin
A:AnswerI hooked a powered sub to my Sony receiver. My sub had speaker wire inputs so I used regular speaker wire to hook it up with. Works and sounds great.
A:AnswerNo HDMI. I use a digital-to-analog sound converter between my TV and this receiver/amp and with a common pigtail (red/white) cable it will plug into any of the four available INPUT ports. There is no port listed as 'auxiliary" on this amp as there was on my last amp but any of the available INPUTS 1 to 4 works the same. Caution! I just left a rather tough review of this receiver/amp. The display failed on mine within two hours after I hooked it up. Everything works but there's no display. This item appears to have quality issues.
A:AnswerHi vinylguy, We're sorry to hear you're having some humming noise issue with your receiver. This is usually not the case for our receiver nor the experience we want you to have. Let's try to isolate this issue by following the troubleshooting steps on this link: https://www.sony.com/electronics/support/audio-components-receivers-amplifiers/str-dh190/articles/00027601
If you are unable to resolve your concern, please email us at [email protected] with the following details:
Name:
bestbuy Username:
Model Number:
Issue:
Telephone Number:
Sincerely,
Sam
A:AnswerHi Cj, Thank you for your inquiry. If your turntable indicates phono out port then you can connect it to the phono in port of the receiver. And, yes. Your speakers should work with the receiver. Please make sure to connect speakers with a nominal impedance of 6 ohms to 16 ohms. Hope this helps! -Sam
A:AnswerHi eva, This receiver is designed to receive a Bluetooth signal from a smartphone or tablet. It is not capable of transmitting one to a Bluetooth device such as wireless headphones or speakers. You will need to connect your speakers via the speaker ports. Hope this helps! -Sam
A:AnswerHi Bowtiebug, Thank you for your inquiry. Yes, you can adjust the volume from your connected Bluetooth device. If you want to add more volume, you can also adjust the volume from the unit itself or from using the remote. Hope this helps! -Sam
A:AnswerHi Danny, Thank you for your inquiry. Unfortunately, there is no option to set a password on the Bluetooth function on this receiver. However, if the Bluetooth input is not selected, there will no opportunity for other unwanted devices to pair with this receiver. Hope this helps! -Sam
A:AnswerThe receiver does not have an HDMI either so you should be good. It has RCA jacks but those did not work for my Roku TV. I ended up using an RCA adapter to the headphone jack on my TV and it works great.
A:AnswerHi nc, Thank you for your interest in the STRDH190 receiver. The dimensions of the box are approximately (W X H X D) 19.3 x 13.8 x 7". And, the dimensions of the unit itself is approximately 430 mm × 133 mm × 284 mm (17 in × 5 1/4 in × 11 1/4 in) including projecting parts and controls. Hope this helps! -Sam
A:AnswerHi Mike, Thanks for your inquiry. If your rear surround sound speakers can directly connect via regular speaker wires to the speaker ports of this receiver then yes, you can connect them. Please make sure that the impedance level of your speakers is within 6-16 ohms. Hope this helps! -Sam
A:AnswerHi Ravi, Thanks for your inquiry. Yes, it can be. Please make sure that there is enough room for ventilation and it lays on a flat and sturdy surface. Hope this helps! -Sam
A:AnswerHi novosaj, thank you for your question. This unit only supports 2 channels (for left and right speakers). You may want to check our other receivers that support the center channel on the link below:
https://www.sony.com/electronics/home-theater/t/av-receivers
~Earl
A:AnswerHi Paul, Thank you for your inquiry. Yes, you can adjust the treble and bass of the receiver using the supplied remote control. Hope this helps! -Sam
A:AnswerHi SwissMan, Thanks for your inquiry. Yes, you can connect this stereo receiver to your TV via RCA audio connection. Unfortunately, cables are not included. Hope this helps! -Sam
