A:AnswerHi mike,
Thank you for the inquiry! Check this link below for customizing the speaker settings to your preferences.
https://helpguide.sony.net/ha/strdh79/v1/en/index.html
Regards,
David
A:AnswerGenerally speaking, things will mastered at different levels. My UHD blu rays are always louder than streaming. Try night mode or pushing up DB or add treble on your center channel
A:AnswerHi J,
Thank you for the inquiry! We recommend connecting wired speakers with a nominal impedance of 6 ohms to 16 ohms. You may find this articles helpful regarding your concern.
https://www.sony.com/electronics/support/audio-components-receivers-amplifiers/str-dh790/articles/00031883
https://www.sony.com/electronics/support/audio-components-receivers-amplifiers/str-dh790/articles/00205291
Regards,
David
A:AnswerHi Jay,
When matching speakers and Audio/Video (A/V) receivers, the ohm rating of the speaker should be equal to or greater than the ohm rating of the receiver to avoid a risk of hardware damage.
Any speakers that feature bare wire connection will work to this receiver, as long as their impedances are from 6 to 16 ohms. More details:
https://www.sony.com/electronics/support/audio-components-receivers-amplifiers/str-dh790/articles/00031883
https://www.sony.com/electronics/support/audio-components-receivers-amplifiers/str-dh790/articles/00205291
Regards,
David
A:AnswerHi TSchmidt,
Unfortunately, it doesn't support external amplifier for additional speakers. The maximum speakers you can connect to the AV receiver is 7.2ch ( 7 speakers and 2 subwoofers).
Regards,
David
A:AnswerHi Customer,
Thank you for the inquiry! You may find this operating Instructions helpful regarding your concern.
https://www.sony.com/electronics/support/res/manuals/4726/890436b47fd2ffcc4003f34dc5f2592c/47269051M.pdf
Regards,
David
A:AnswerHi Skywing1,
We do apologize for the inconvenience. We recommend our STR-DN1080 if you want an AV receiver that has a Wi-Fi function.
Regards,
David
A:AnswerHi bob74,
We're sorry to hear that. Make sure that subwoofer cable is properly connected and if possible replace it with a new one. Speaker wires that are anywhere between 12 to 16 gauge are most commonly used for connecting speakers to an amplifier or an Audio/Video (A/V) receiver. Yes, you need Dolby vision compatible television to output Dolby vision content.
Regards,
David
A:AnswerHi Customer,
Thank you for the inquiry! All of our Sony AV receivers don't have a speakers included. You can create a robust 5.1.2 home theater setup perfect for Dolby Atmos with the complete range of CS speakers from Sony with 2 SSCS5 bookshelf speakers, 1 SSCS8 center channel speaker, 2 SSCS3 tower speakers, 2 SSCSE Dolby Atmos enabled speakers, and the SACS9 subwoofer.
If you want a third party speakers, any speakers that feature bare wire connection will work to this receiver, as long as their impedances are from 6 to 16 ohms.
Regards,
David
A:AnswerYes, their is a pairing mode that you can hook a phone to the receiver. I have not paired other wireless speakers to the receiver yet as I don’t have any at the moment.
A:AnswerHi Peter,
With 6 ohm loads, both channels driven, from 20 Hz – 20,000 Hz; rated 90 watts per
channel minimum RMS power at stereo mode, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. See page 56 onwards for more technical specifications.
https://www.sony.com/electronics/support/res/manuals/4726/890436b47fd2ffcc4003f34dc5f2592c/47269051M.pdf
Regards,
David
A:AnswerThis is a Bluetooth receiver which means it can only take in Bluetooth signals from your phone or tablet. This would require an additional transmitter that would use the headphones outlet as the source.
