DS18 Audio - FRP Monoblock Class D Car Amplifier with Remote Level Control, 8000W RMS at 1 Ohm - Blue
Reviews coming soon
About this product
The FRP-8K/BL is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 8000 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 83dB. A selectable Fixed Band-Pass crossover covers 10Hz-2KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Color
BlueFeatures
8000W RMS Monoblock Car Amplifier
Delivers 8000 watts RMS at 1 ohms. Wire down to the lowest impedance your subwoofer allows to get the full rating, and set the gain to your speaker RMS to keep the signal clean.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 95%. That means less strain on your electrical system and a smaller chassis for the same power.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable Fixed Band-Pass crossover covering 10Hz-2KHz and bass boost adjustable from 0-12dB centered between 50Hz. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with thermal, over-load, dc output and short circuit output protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps monoblock amplifiers alive in daily-driven vehicles.
0.5% THD and 83dB Signal-to-Noise
Total harmonic distortion of 0.5% and a signal-to-noise ratio of 83dB mean the amplifier reproduces the signal it is given instead of adding hiss and distortion of its own, which matters most at high volume.
Specifications
- Amplifier ClassDNumber Of Channels1Bass BoostVariableBridgeableNo
Reviews
This product doesn't have any reviews yet.
Compare similar products

The FRP-8K/BL is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 8000 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 83dB. A selectable Fixed Band-Pass crossover covers 10Hz-2KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

The Memphis Audio MOJO Pro amplifier delivers professional-grade power and precision in a rugged, compact chassis. Engineered with an extruded aluminum heatsink featuring exposed metal accents and a bold orange strip, this amplifier combines performance and design worthy of the MOJO name. Ideal for pro audio and high-performance car audio systems, the MOJO Pro amplifier provides high output power, exceptional efficiency, and clean signal response. Mono models include a bass knob and can be strapped together for additional power, giving installers and enthusiasts flexible system configuration options. Features • Extruded aluminum heatsink with exposed accents • 12dB/octave Butterworth crossovers • Variable crossovers for precise tuning • Variable EQ bass boost (mono block models) • Strapable mono block design for expanded power • Bass knob included (mono block models) Specifications • RMS Power 4Ω: 830 x 1 • RMS Power 2Ω: 1500 x 1 • RMS Power 1Ω: 2000 x 1 • Bridged/Mono Power 4Ω: – • THD (4Ω): <1% • Frequency Response: 11Hz – 200Hz • Input Range: 400mV – 7.5V • Dimensions (L x W x H): 7.5" x 13.2" x 2" • Recommended Amp Kit: 0GKIT Built for extreme reliability and clean, controlled output, the MOJO Pro amplifier is the perfect foundation for any high-performance or pro audio build.

The FRP-2.5K/TI is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 2500 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 83dB. A selectable Fixed Band-Pass crossover covers HP: 10Hz-2KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

The FRP-12K/BL is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 12000 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 90dB. A selectable Band-Pass crossover covers HP: 10Hz-2KHz / LP: 40Hz-15KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.


































