DS18 Audio - FRP Monoblock Class D Car Amplifier with Remote Level Control, 2500W RMS at 1 Ohm - Titanium
Reviews coming soon
About this product
The FRP-2.5K/TI is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 2500 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 83dB. A selectable Fixed Band-Pass crossover covers HP: 10Hz-2KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Color
Titanium2500W RMS Monoblock Car Amplifier
Delivers 2500 watts RMS at 1 ohms. Wire down to the lowest impedance your subwoofer allows to get the full rating, and set the gain to your speaker RMS to keep the signal clean.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 85.6%. That means less strain on your electrical system and a smaller chassis for the same power.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable Fixed Band-Pass crossover covering HP: 10Hz-2KHz / LP: 40Hz-20KHz and bass boost adjustable from 0-12dB centered between 50Hz. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with thermal, over-load, short circuit output and voltage input protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps monoblock amplifiers alive in daily-driven vehicles.
0.5% THD and 83dB Signal-to-Noise
Total harmonic distortion of 0.5% and a signal-to-noise ratio of 83dB mean the amplifier reproduces the signal it is given instead of adding hiss and distortion of its own, which matters most at high volume.
- Amplifier ClassDNumber Of Channels1Bass BoostVariableBridgeableNo
Reviews
This product doesn't have any reviews yet.
Compare similar products
The FRP-2.5K/TI is a monoblock car amplifier from the DS18 FRP series, built as a Class D design. It delivers 2500 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 83dB. A selectable Fixed Band-Pass crossover covers HP: 10Hz-2KHz / LP: 40Hz-20KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Turn up the volume with this KICKER CX-Series mono amplifier. A variable 12dB crossover makes it easy to optimize audio levels, while the 24dB subsonic filter protects listeners from damaging frequencies. The compact design of this KICKER CX-Series mono amplifier offers flexible placement, and the FIT+ technology provides compatibility with most radios.
Create a custom sound experience with this KICKER CX-Series mono amplifier. The variable 12dB crossovers provide the control you need to get the exact sound you want, and the 24dB subsonic filter protects against damaging frequencies. With its small footprint and Fail-safe Integration Technology-PLUS, this KICKER CX-Series mono amplifier is easy to install and works with almost any radio.
The Pioneer GM-DX874 four-channel amplifier will deliver up to 150 watts RMS to each of your front and rear speakers for powerful music. Highly efficient Class D technology keeps this powerful amp running as cool as it looks, and allows for a compact chassis that fits in a lot of out of the way spaces. The frequency response of this amplifier stretches up to 50,000 Hz, for Hi-Res Audio Certified playback. Pioneer uses high-grade electronic parts and gold-plated RCA connections to ensure maximum performance. Speaker-level inputs allow you to install this amp in a factory system with no RCA connections. The amplifier switches its input mode automatically when it detects the high-level signal, eliminating the need to run a turn-on lead to your receiver or fuse box. Built-in high- and low-pass filters let you adjust the sound for your vehicle's interior, whether you're driving speakers or subs.
| Pros for DS18 Audio - FRP Monoblock Class D Car Amplifier with Remote Level Control, 2500W RMS at 1 Ohm - Titanium | |||
|---|---|---|---|
| There were no pros for this product— | Power, Sound Quality, Ease of use, Size, Bass | Power, Sound Quality, Size, Ease of use, Price | Sound Quality, Power, Size, Installation Ease, Connectivity |
| Cons for DS18 Audio - FRP Monoblock Class D Car Amplifier with Remote Level Control, 2500W RMS at 1 Ohm - Titanium | |||
| There were no cons for this product— | Overheating | Heat | Heat Dissipation |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
More to consider
Clearance$399.99The price was $499.99
$199.99The price was $219.99
$199.99The price was $219.99
Enjoy your ride Sponsored
$269.99The price was $349.99
$409.99The price was $479.99
Keep exploring
$74.99The price was $78.99
$142.13The price was $148.24
