KICKER - CompR Dual 10" Dual-Voice-Coil 2-Ohm Subwoofers with Enclosure - Black
- Key Specs
- RMS Power: 800 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 1600 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Impedance: 2 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Dual Voice Coils: true
- Woofer Size: 10 inches
- Woofer Composition: Injection-molded polypropylene
- Woofer Surround Material: Santoprene
- General
- Product Name: CompR Dual 10" Dual-Voice-Coil 2-Ohm Subwoofers with Enclosure
- Brand: KICKER
- Model Number: 43DCWR102
- Audio Power
- RMS Power: 800 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 1600 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Integrated Amplifier: false
- Audio
- Impedance: 2 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Efficiency: 96.5 decibels
- Features
- Dual Voice Coils: true
- Grille Included: false
- Dimensions
- Woofer Size: 10 inches
- Product Height: 14 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 28.4375 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 17.5 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 1 pounds (The out of box weight of the item.)
- Design
- Woofer Composition: Injection-molded polypropylene
- Woofer Surround Material: Santoprene
- Enclosure
- Enclosed: true
- Enclosure Type: Ported
- Box Material: Wood
- Box Covering Material: Carpet
- Other
- UPC: 713034076216
Bring the power of a professional bass system to your car with this 10-inch Kicker CompR subwoofer. At just 14 inches tall, these two speakers fit wherever you want them, eliminating the need for car renovations. This Kicker CompR subwoofer provides the best sound quality when used with 800W of electricity, but it can handle up to 1600W.
Geek Squad® Installation Recommended
Visit your local Best Buy store for more information.
- Handles up to 1600W peak power (800W RMS): For powerful sound.
- 96.5dB sensitivity: Delivers powerful output.
- 14-1/2" top depth; 17-5/16" bottom depth: For the right fit.
- 10" injection-molded polypropylene woofer cone: With a ribbed Santoprene surround for deep, expressive bass.
- 2 ohms impedance: Conducts power to keep speakers working at optimal levels.
- New front-facing port design: Enriches low tones for booming bass.
- Thick wood box with internal bracing: For excellent durability.
- Covered in plush carpet:
With the signature Kicker logo, there’s no doubt that your box and sound are uniquely Kicker.
Whats Included
- CompR Dual 10" Dual-Voice-Coil 2-Ohm Subwoofers with Enclosure
Q: Is it difficult to install? How long? And is a 1000w amp ok?
A: My recommendation get total tech support then install it. You should use a 800 RMS amp at 2 ohms so kicker kx 800 would be perfect for this enclosure. And get the kicker 4 gauge wiring kit (150$) and maybe a line out converter (15$)
Q: Will a 600 Watt Boss Amp work with these subs ?
A: It may but it just truly will not be enough power
A: I have a 2003 Chrysler and I have these subs paired with a 1200w RMS amp, and they sound great. Although at higher volume levels, they seem to rattle everything in my car, and it took me a while to sort of sound proof everything to stop certain things from vibrating so bad that it sounded terrible. I'm guessing that with older cars, things start to get looser over time and rattle more easily. I also notice that when playing really heavy bass at higher volumes, my car's electrical system has trouble keeping up with it. My lights dim pretty bad in sync with the bass. I do not have a capacitor yet, and I am not even sure if that will help with the problem. So as far as already having another amp in your car, you may have issues with power. Just make sure to use as heavy of a wire gauge as you can to make sure you're getting as little resistance in the run as possible. I don't often run them at full power, so when using them at moderate volume levels, the light dimming doesn't happen.
Q: If i buy these from Best Buy do I get them installed for free sinse im paying 400 dollars ?
A: No, you are paying 399 for the sub. On top of that you have to buy wiring kits, install, amplifier, etc. I bought the Total Tech support which basically got me everything installed for free. I had new speakers with amp put in though.
Q: Would this fit into my 2010 suburban? What amp should i get? Where will I put it?
A: It will fit. I’m using a Pioneer GM-9601(rated rms 800 Watts) @ 2 ohm and it’s perfect.
A: Trying to put this in your Tacoma will be fine, it will be a tight squeeze, it would take up almost half of your cab in width, as far as running wires, that's always a challenge, also are you hooking it up to a factory radio or an aftermarket radio? if factory you will need a line output converter to splice into the factory signal for an aftermarket system. our installers will do a sub and amp setup for $99 and a line output setup for $30. if you want to save yourself hours of hours of labor and googleling, let our guys do it in store, takes about 2 to 3 hours :)
Q: Will this fit in my 2007 GMC Yukon?
A: Yes most definitely will
Q: Will this fit in my 2005 Acura TL? Thanks!
A: I have 98 acura. It was squeezed into the trunk but does fit
