Questions & Answers

Q: QuestionWill this combo work with my Technics SL 1401 and in either case, can you recommend what would be best

Asked 1 year ago by Anonymous.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red

• A:Answer Yes, it will.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill the AT-VM95ML/H headshell/ cartridge kit fit the Denon DP-300F's 45mm overhang? Is alignment still necessary? I thought that buying a kit will skip the need for aligning it.. thank you

Asked 1 year ago by MD.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red

• A:Answer You cannot use the AT-VM95ML/H Headshell/Cartridge Combo Kit on the Denon DP-300F Turntable, the turntable uses an ANGLED headshell, not a straight one. You can use the AT-VM95ML Cartridge, but you will have to use the angled headshell that Denon provided.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit on a Technics SL-5300? Thank you! :)

Asked 1 year ago by MaineTallboy.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red

• A:Answer Yes, it will.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHow many play hours is this expected to last?

Asked 1 year ago by JackDiamond.

• A:Answer Our elliptical shaped styli have a lifespan of around 300 hours of play.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with a Sanusi F DR35?

Asked 1 year ago by Anonymous.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95EN/H Headshell/Cartridge Kit - Orange

Q: Questionwill this work on 120 turn table

Asked 1 year ago by Anonymous.

• A:Answer Yes, it will.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit a denon 47f straight arm

Asked 1 year ago by Anonymous.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer It will not. You can use the cartridge itself, the AT-VM95C, but not the headshell that comes with the AT-VM95C/H Headshell/Cartridge Combo Kit. Your turntable has a straight tonearm and an angled headshell, you must use the Denon angled headshell.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit a Dual 506 turntable?

Asked 1 year ago by BJ.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95EN/H Headshell/Cartridge Kit - Orange

• A:Answer It will not, not the headshell anyway. You may use the cartridge only, the AT-VM95EN, but you must use the Dual headshell and Dual cartridge mounting plate.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this cartridge/headshell work on my MCS683-6500? It previously had a AT cartridge which was yellow but did not show any numbers. The turntable has no pre-amp and I have it paired with my Marantaz AVR. Thanks.

Asked 1 year ago by Davey.

• A:Answer You may use the AT-VM95C Cartridge on the existing MCS headshell, but we cannot confirm that the AT-VM95C/H Headshell/Cartridge combo Kit will work on the MCS tonearm. The provided counterweight would need to have the ability to counterbalance a total of 15.5 grams (combined headshell + cartridge weight).

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill it fit my Audia Tecnicka60 turntable

Asked 1 year ago by Turntable.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red

• A:Answer No, it will not. Only the stylus (needle) is replaceable on 60 Series turntables.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work/compatible with Marantz 6350q turntable? Manufacturers states 18mm overhang. Thank you.

Asked 1 year ago by LPspinner.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red

• A:Answer Yes

  Answered 1 year ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this fit on a Sony PSX55S turntable?

Asked 2 years ago by Christo.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer You can use the AT-VM95C Cartridge, but not the AT-HS6 headshell. You must use the Sony angled headshell that was provided with your turntable. The AT-HS6 Headshell is straight..

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat replacement stylus would be recommended for Dual Turntable CS 1268; I have a Shure Stylus 600H 45 HE now. Thank-You.

Asked 2 years ago by BoyBill.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer You can use the AT-VM95C Cartridge on the existing permanently attached proprietary ANGLED Dual headshell provided you have the Dual half-inch mount adapter. You CANNOT use the AT-VM95C/H Headshell/Cartridge Combo Kit on this turntable.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a Technics SL-Q202 with an old AT433E I need to replace. What is a good replacement cartridge?

Asked 2 years ago by Rory.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer Unless you have the optional Auxiliary weight that screws into the end of the tonearm, you will need to use the supplied Technics headshell and mount the AT-VM95C Cartridge to it. The AT-VM95C/H Headshell/Cartridge Combo Kit is .5 grams too heavy for the provided main counterweight to counterbalance. Please note that the VM520EB Cartridge, not the AT-VM95C, is the current equivalent to the AT433E.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this compatible with a stanton STR8 150?

Asked 2 years ago by jong.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer Yes, it is.

  Answered 2 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit a Sanyo TP 1005?

Asked 2 years ago by Topher.

• A:Answer It will fit, and the stylus overhang distance will be the correct, but we have not been able to determine what the maximum combined weight of the headshell + cartridge is that the counterweight can counterbalance. The AT-VM95E/H Headshell/Cartridge Combo Kit weighs 15.5 grams.

  Answered 2 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work on a Vintage Hitachi HT 350 Turntable ?

Asked 2 years ago by TexasHowie.

• A:Answer Quite possibly, depending on what the maximum weight of the cartridge + headshell is which the provided counterweight can counterbalance. Hitachi documentation states that the cartridge weight range when using the supplied Hitachi headshell is 4 to 9 grams. They do not state what the weight of the headshell itself is unfortunately. The AT-VM95E/H Headshell/Cartridge Combo Kit weighs 15.5 grams total; the cartridge weighs 6.1 grams and the headshell with mounting screws weighs 9.4 grams. Most removable half-inch headshells weigh between 7 and 10 grams which would put the range of the total cartridge + headshell weight at 11 to 19 grams, so I think you will be ok.

  Answered 2 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work on a Sony PS4300 turntable?

Asked 2 years ago by David.

This question was asked about the related product: Audio-Technica - AT-VM95C/H Headshell/Cartridge Kit - Blue

• A:Answer Yes, it will as long as you use the standard counterweight that came with your turntable, do not use the extra weight that was provided.

  Answered 2 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit my Sony PS -X75 biotracer?

Asked 2 years ago by Les.

• A:Answer It will, but you will need to adjust the stylus overhang distance. The overhang comes set at 15.5mm on the Headshell/Cartridge Combo Kits. Your turntable has an overhang specification of 13mm. You will need to back the cartridge up 2.5mm on the headshell.

  Answered 2 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question