“Honeywell RTH9585WF installed. Heat setting at 72 deg F, but the heater keeps running past the setting, getting up to 74, and even 76 deg before shutting off. The temperature reading also seems to be erratic. Voltages all good. Settings are correct.”
1-4 of 4 Answers
Hi Drue, this is not what you should expect. The system should not keep running past the set point. Please verify if the thermostat keeps showing 'Heat On' past the set point and feel free to contact our tech support team at (800) 633-3991 or via Private Message to our Honeywell Home Facebook account. We will be happy to help troubleshooting and verify what can be causing this. - Maria
Sorry, there was a problem. Please try again later.Check your fan setting. Should be on automatic since your thermostat is operating everything
Sorry, there was a problem. Please try again later.I recently changed one setting since the photos.... from 1 stage - to 2 stages - both W and W2 are connected
Sorry, there was a problem. Please try again later.Make sure you're internet connected as well. If you have heat pump (A/C and heat - I live in Apt complex in Fl. with all main A/C units on outside) select heat pump, not forced air. Also you need to select 'Done' with each selection change before selecting next or it won't set it correctly. Photos will show how I've set up. Hope this helps... Also using a stylus is easier than your fingers. It fits securely right above it, when ready to make any changes.
Sorry, there was a problem. Please try again later.
