A:AnswerHi Hardystereo, Thanks for your inquiry. Yes, you can connect your turntable to one of the RCA audio input of the unit. To connect a turntable that only has a PHONO output jack, you need to connect a phono equalizer (not supplied) between the turntable and this receiver. Hope this helps! -Sam
A:AnswerHi CJ, Thanks for your inquiry. Unfortunately, there is no option to only get the sound on your outside speakers. I would suggest checking out the STRDH190. This unit can easily switch between A or B or use them all together at the same time. Hope this helps! -Sam
A:AnswerHi Connor, Thanks for your inquiry. Unfortunately, this receiver only has an optical input port. You will need an optical output port to connect your soundbar and produce sound. We recommend connecting speakers to the speaker ports of the receiver to get sound. Hope this helps! -Sam
A:AnswerHi Adam, Thanks for your inquiry. Using an IR extender is not recommended as we cannot guarantee its operation. The headphone jack input of the unit can only be used for headphones to listen to music. Hope this helps! -Sam
A:AnswerHi Sammisunrise, Thanks for your inquiry. The 2-year limited manufacturer's warranty of this unit is not applicable to an open box unit. Please refer to your authorized dealer to determine if the product is listed as brand new or open box. Hope this helps! -Sam
A:AnswerHi Zoo, Thank you for your interest in the STRDH590. Yes, it will. You can connect your Apple TV to one of the HDMI inputs of the receiver. Hope this helps! -Sam
A:AnswerHi Jim, Thank you for your interest in the STRDH590 receiver. Yes! You will definitely hear all the devices connected to HDMI inputs of your TV. Please make sure to use a high-speed HDMI cable when connected via HDMI ARC on both ends of your devices. Hope this helps! -Sam
A:AnswerHi Roofis, Thanks for your inquiry. Unfortunately, the lossless codec is not supported. However, you can connect your mobile device to this receiver via Bluetooth to stream amazon music. Hope this helps! -Sam
A:AnswerHi donnyd, Thanks for your inquiry. This receiver should go to the last input that you've selected before you turn off the unit. If the unit defaults to TV input and not to the last input that you've selected, please make sure that the unit is connected to the TV via HDMI ARC on both ends and the control for HDMI function turned on. If you are unable to resolve your concern, please email us at [email protected] with the following details: Name: Bestbuy Username: Model Number: Issue: Telephone Number: Sincerely, Sam
A:AnswerHi Melissa, Thanks for the inquiry. The frequency response of the STRDH590 is 10 Hz – 100 kHz, +0.5/–2 dB (with sound field and equalizer bypassed). Hope this helps! -Sam
A:AnswerIf you wire both speakers in series and connect them to one channel, yes. Or obtain two 8 ohm wire wound resistors and connect them in series with each speaker; then you could use both speakers.
