A:AnswerThere's a line-level output for an active subwoofer.
For a passive subwoofer, there's no dedicated amplified channel, however the receiver can be configured to send full-frequency out the front mains and let whatever is hooked up deal with it. You'll need a passive crossover network in this case to keep the lows and highs out of the sub and the bass out of the mains.
A:AnswerComcast used to provide FM radio on the cable trunkline. There is a 75ohm input on the back for FM Radio only. The unit does come with a wire to attach and stick the top end to the wall with a tack. If you have a cable at the stereo and a small hub or even the main receiver or cable modem. You can use a 2-way splitter. The wire or Cable hookup may be acceptable for apartments I would recommend running a separate RG-6 cable to an attic space. Leave 6-8 feet to run across the top rafters. Strip off the outer shield and wire braid. Don't leave any extra braid or shield to short out the center wire. Wire can be taped, zip tied or stapled across the rafters. NOTE: ANY local VHF antenna input will receive FM very well. UHF antennas will have diminished reception due to frequency bandwidth reception. ALSO: AM reception is on a closed loop wire, NOT coaxial cable. It is considered to be 300 ohm wire. Receiver comes with the antenna. It can be placed in an attic space as well and splice in inexpensive speaker wire run between RCVR and attic. Just hook the loop or screw base to a rafter.
A:AnswerYes it will indeed. 8K is the new buzzword marketing term for something that's hardly ever seen (no 8K content here). There's also issues with the 2.1 ports not offering a high enough bandwidth to support it. No word on fixes or replacements either. A trickle of brand new receivers are coming out now, but I'm waiting until all of these issues are settled.
A:AnswerMusicCast is part of an integration system that can share media to all other MusicCast compatible units. This includes audio storage devices, turntables, wired and wireless. It is, in effect its OWN Wi-Fi Network.
A:Answer5.1= five speakers and 1 sub
5.2 = five speakers and 2 subs
I run a 5.2 the multi subwoofer adds a dynamic that one cannot do and you can hide them because you can use smaller subs
A:AnswerThis receiver should be able to power your Klipsch speakers. There is not a phono input, so you will need to purchase a magnetic phono cartridge preamplifier and plug it into an auxiliary input. You can find the preamplifiers on Amazon.
A:AnswerNo only controls one zone. Can try to splice speakers together but will not be able to play different audio; all will play same audio. There is the 7.2 channel that offers 2 zones.
