Questions & Answers

Q: QuestionIs the headshell compatible with older non-AT turntables? Ex. My Onkyo CP-1027f

Asked 3 years ago by Deee.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95SP/H Headshell/Cartridge Kit - Gray

• A:Answer The headshell on your turntable is not straight, it is angled. You must us the provided proprietary angled Onkyo headshell with whatever cartridge you choose. Note that the AT-VM95SP Cartridge is for playing 78 rpm SP (standard play) shellac type records, but your turntable does not have a 78-rpm speed. If you intended to select a cartridge that can play 33-1/3 & 45 rpm vinyl records, we recommend the AT-VM95E Cartridge instead.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with the older ATPL120 I bought around 2008’?

Asked 3 years ago by QuestionGuy.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer Yes, it will. Please note that the headshell color is black, I believe the 2008 model AT-LP120 Turntable was available in silver only.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this compatible with a Dual CS-515 turntable? I'd ideally like to replace the headshell and cartridge.

Asked 3 years ago by Brian.

• A:Answer No, it is not. You may use the AT-VM95C Cartridge, but not the straight headshell that it comes mounted to when you purchase the AT-VM95C/H Headshell/Cartridge Combo Kit. Because your turntable has a straight tonearm, it uses an angled headshell. This particular Dual headshell also uses a proprietary type fitting for attaching the headshell to the tonearm, you must use the Dual angled headshell.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this cartridge work with the Audio-Technica VM540ML model of turntable? We have purchased 6 needles in 2 years & keep giving out. We have decided to buy a new cartridge, would this work with our turntable. If not where can we get one reasonable?

Asked 3 years ago by AudioTechnicaVM540MLHead.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red

• A:Answer VM540ML is the model number of a cartridge, not a turntable. Please contact us at [email protected] with the model number of the turntable and please provide the effective tonearm mass if you know it. If you have purchased 6 needles in 2 years something is wrong. Failing needles can be the result of a cartridge compliance/effective tonearm mass mismatch, or the vertical tracking force (VTF) being set incorrectly.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit a Sony PS5550 turntable?

Asked 3 years ago by BG.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95ML/H Headshell/Cartridge Kit - Red

• A:Answer Yes it will.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI would assume this will fit and work perfectly with any Audio Technica Turntable ??

Asked 3 years ago by 1RUBBERMAN.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95EN/H Headshell/Cartridge Kit - Orange

• A:Answer As long as it is one of our models with an S or J shaped tonearm and uses a straight detachable head shell, yes.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this compatible with my music hall usb-1? Thanks

Asked 3 years ago by Awilderm.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer Yes, it is.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this the best replacement for my Technics SL1500

Asked 3 years ago by Smooth.

• A:Answer Best for what, what is the application? Please contact us at [email protected] for further assistance. Thanks

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs the vm95sh-h headshell/cart compatibile with Audio-Technica's AT-LPW50PB turntable?

Asked 3 years ago by Ted.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95SH/H Headshell/Cartridge Kit - Brown

• A:Answer No, it is not. You may use the AT-VM95SH Cartridge, but it has to be used with the ANGLED headshell that is provided with the turntable.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDo you have a stylus that will fit a JVC Model AL-30BK Turntable?

Asked 3 years ago by Tres.

• A:Answer Please check the model number of the turntable for accuracy, we have not been able to find any information on this model. If the number is accurate, please send a photo of your turntable to [email protected]

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit in Lenco L 90

Asked 3 years ago by Ivo.

• A:Answer You can use the AT-VM95C Cartridge (without a headshell). Because your turntable has a straight tonearm it uses an angled headshell. You have to use the supplied angled headshell.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill the cartridge fit the Technics turntable Sl-D3?

Asked 3 years ago by Umrebz.

• A:Answer Yes it will.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with my Fluance RT62 and is the cartridge already aligned in the headshell?

Asked 3 years ago by StWalker.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer We are assuming you mean the Fluance RT82 Turntable as we have found no information regarding an RT62. It should work, but you may have to adjust the stylus overhang. The stylus overhang is set at 15.5mm on the AT-VM95E/H Combo Kit. We do not see the overhang specification in the Specifications section for the turntables tonearm.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill it fit or work with a technics SL B5 turntable

Asked 3 years ago by 87az68.

• A:Answer Yes, it will.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with a Luxman vintage turntable with a Stax UA-7 Tonearm?

Asked 4 years ago by Anonymous.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95EN/H Headshell/Cartridge Kit - Orange

• A:Answer It depends. Which tonearm are you using, the shorter or longer one, and what is the effective mass of the tonearm including the headshell? How much does the headshell weigh? The compliance of the AT-VM95EN Cartridge is 12cu @ 10 Hz and the mass of the cartridge is 6.5 grams including the mounting screws. The AT-HS6 Headshell included with the AT-VM95EN/H Headshell/Cartridge combo kit weighs 9 grams. The cartridge is suitable for use with tonearms whose effective mass is anywhere from 12 to 28 grams.

  Answered 4 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI realize the AT-VM95SP/H cartridge won't fit into a P-mount tone arm. However, I have an AT Series V cartridge and need a new stylus. Will this Shibata stylus fit into the Series V? If not, can you suggest a stylus that will fit it?

Asked 4 years ago by Virwill7.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95SP/H Headshell/Cartridge Kit - Gray

• A:Answer Google BC92DSH. This is a Shibata P mount cartridge and should work with your P mount tone arm. As far as a stylus replacements, there are several to choose from but not a direct Shibata replacement.

  Answered 3 years ago by TN5050

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this cartridge work on a Phillips 220 turntable. Thanks

Asked 4 years ago by Jeff.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer sorry the turntable is a Phillips 222

  Answered 4 years ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this work on Technics SL-B210?

Asked 4 years ago by Jeff.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer Hi, The stock setup for an SL-B210 is a P-Mount style cartridge which just plugs into the arm. This is designed for a 1/2” type mount. You can use a P-Mount cartridge with an adapter to a 1/2” mount but not a 1/2” mount to a P-Mount arm. So no.

  Answered 4 years ago by TopCatVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionwill this fit 50 year old Dual 1218 turntable?

Asked 4 years ago by Bob.

This question was asked about the related product: Audio-Technica - Audio Technica AT-VM95E/H Headshell/Cartridge Kit - Green

• A:Answer It will not, not with our headshell anyway. You can use our AT-VM95E Cartridge, but you must use the Dual cartridge holder with the attached Dual headshell.

  Answered 4 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question