Questions & Answers

Q: QuestionWhich ge over the range microwave models are ready for inside venting? Thank you.

Asked 4 years ago by Anonymous.

• A:Answer This unit can be vented to the outside. it give you instruction on how it can be done several different ways.

  Answered 4 years ago by Arno

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questiondoes this model have steam cleaning

Asked 4 years ago by LGWasher.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hello- This is an excellent question. We are happy to help! This model doesn't have a Steam Clean feature but you can easily create steam in your microwave to help you clean. ~Mix 2 cups of water and 2 tablespoons of distilled white vinegar into a microwave-safe measuring cup or bowl. ~Place the cup or bowl inside your microwave and heat on high power until the liquid comes to a boil. ~Let stand for 3 minutes, so that the steam trapped inside has time to loosen up all the caked-on food gunk. We hope this helps! Let us know if you have any questions in the future, please let us know. We are here for you! Joyce@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (1)Unhelpful (1)ReportAnswer this question

Q: QuestionWe want to replace our jym1650sh05 he microwave. We have a cabinet above the microwave and it’s lower the height of the current model is good. Which model would work for replacement

Asked 4 years ago by Drg.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Slate

• A:Answer Hi there, we truly appreciate your loyalty to GE Appliances and we're happy to help. This model (JVM6175EKES) should work as a great replacement. All 30" over-the-range microwaves are approximately the same width and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. We just suggest using the mounting bracket of your new microwave. We hope this information is found useful to you and we're wishing you the best. - Guy@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionThe microwave I bought JVM6175SKSS, had to be returned because mounting holes extended too far out of above cabinet. Need mounting holes that are no farther than 9 1/2 inches from back of microwave. Can you suggest one?

Asked 4 years ago by Bayviewbb.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Black

• A:Answer Hi there, we truly appreciate your interest in one of our microwaves. After doing some digging, we're sorry to say that the dimensions of all of our over-the-range models from the wall to the center line of the mounting hole in the upper cabinet is 10 3/8". We apologize if this information comes at an inconvenience to you and we're wishing you the best. Thanks for reaching out. - Guy@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionOur model JVM6175SK3SS is only 18 months old and the bottom attachment of the handle broke. Is it accurate that you have to replace the entire door for over $200?! This is how the manual appears, but that seems not possible. Please advise.

Asked 4 years ago by Disappointed.

• A:Answer Hello - We're very sorry to hear your microwave handle broke after only 18 months. We can understand your frustration and certainly want to apologize for your inconvenience. We’d like to look into this for you, so when you have a moment please reach out to us via social media in a private message and include your model and serial number, name, address, email address and phone number. Thank you! - Sharon@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill the bracket that is used to mount a PVM9005DJ2WW microwave work for a JVM6175DK2WW. Is it unusual for a PVM9005DJ2WW to be completely "dead"? Thank you in advance for your help!

Asked 4 years ago by Wondering.

• A:Answer Hi, Thanks for asking great questions! We're more than happy to help. When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model and is not interchangeable. The new screws, bolts, and exhaust adapter should also be used. We're very disappointed to hear your microwave isn't working and suggest resetting the electronics by disconnecting power at the circuit breaker for 30 seconds. If this doesn't help, we suggest calling GE Service at 1-800-432-2737 or scheduling an appointment online at: https://www.geappliances.com/ge/service-and-support/service.htm We hope you find this helpful. Thanks! - Sharon@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this microwave need to be mounted over a range? I am wondering if this can be mounted in a cabinet.

Asked 4 years ago by ken5.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave - Black Stainless Steel

• A:Answer Hello- We appreciate you checking with us. This is an over the range model that can't be built into or mounted in a cabinet. This model is designed to go over a free-standing or slide in range. ~According to Underwriters Laboratories (UL), which approves appliance installations, you cannot use an over-the-range microwave on the counter or in a shelf. Besides not being approved for this installation, these microwaves don't have feet and are also often slanted (not level) on the bottom. Additionally, if the surface lights or vent fan were to be turned on accidentally, it could cause damage to the shelf or microwave. We recommend looking at our models that offer an under cabinet hanging kit. Take a look at the following model: https://www.bestbuy.com/site/ge-1-5-cu-ft-mid-size-microwave-stainless-steel/5527522.p?skuId=5527522 We apologize for your inconvenience and hope this is helpful. Please let us know if you have any additional questions. We are happy to help! Joyce@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI just had my microwave installed and I noticed it was a bit noisy when i tried it. then i noticed the word vent lit up on the display which i assume is why its load, but i can't get that to go away. There is zero heat from the oven so i dont know that

Asked 4 years ago by Anonymous.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Slate

• A:Answer Hello- We are sorry to hear you are having this issue. We can certainly understand your frustration and are happy to help! Please try resetting the electronics by unplugging the unit or flipping the breaker off to it for at least 5 minutes. Then restore power and set your clock and verify the vent is turned off. If you still see the word vent or if the vent is continuing to run. We recommend taking advantage of your warranty and reaching out to GE Consumer Service at 1-800-432-2737. Thank you! Joyce@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have an 11 year old GE over the range microwave model JNM1851SM4SS which no longer works. I see one on your website which is model number JVM3160RFSS would that be the replacement for the one I have. Please advise.

Asked 4 years ago by Mary.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Slate

• A:Answer Hello, thank you for your question and interest in our microwaves! We recommend model JNM3184RPSS as a replacement for your old unit as it features similar dimensions. For your reference, your current microwave has the following dimensions: 16-13/32" x 29-7/8" x 15-1/4" (HxWxD) and the JNM3184RPSS has these dimensions: 16-7/16" x 29-7/8" x 15-1/8" (HxWxD). We hope this helps! -Chris@GEA

  Answered 2 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionwhat is the steam sensor filter. we were making pop corn in micro and that started flashing. the pop corn burned

Asked 4 years ago by tiger.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Slate

• A:Answer Hi there, we're sorry to hear your popcorn burned. We know what a bummer this can be and how worrisome this is so we're happy to help. The Sensor Features detect the increasing humidity released during cooking. The oven automatically adjusts the cooking time to various types and amounts of food. Based on the information provided, you may have been using Sensor Cooking and you may also just so happen to have to replace your charcoal filter (Filter signal). The light will illuminate after approximately 6 months to alert you to replace the charcoal filter (if used) and clean/replace the grease filters. You can reset this by pushing and holding the Reset Filter Button for 3 seconds. Also, the Popcorn button section of the owner's manual on page 14 states the following: Follow package instructions, using Cook Time if the package is less than 2.0 ounces or larger than 3.5 ounces. We just finally suggest making sure your popcorn was in that weight range. Otherwise, this could've been a cause of the burn. We hope this helps and we're wishing you the very best! - Guy@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhy can’t I find model JVM6175EK5ES? Note the numeral “5” after K

Asked 4 years ago by Horace.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Slate

• A:Answer Hello, thank you for your question. When the model is manufactured, these extra letters/numbers are placed on the appliance rating plate and product registration card. These letters/numbers are used to identify manufacturing specific data when the appliance is made. Should service or parts be needed, these are used as identifiers for the specific appliance. While shopping online, you will primarily see model numbers listed without these identifiers - in this case, JVM6175EKES. When you purchase and receive your unit, the numeric identifier will be listed in the model number on the rating plate. If you are looking for a specific version of an appliance, you would need to speak to your local Best Buy to see if they are able to provide you with stock information. Rest assured, though, any JVM6175EKES microwave will be functionally identical to JVM6175EK5ES. We hope this helps! -Chris@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWe are looking to replace our current GE JNM1851DM1BB, and wanted to ask if the JVM6175YKFS will be compatible with the size/features and would we be able to utilize the existing wall mount & top screws. Thank you.

Asked 4 years ago by TomTwin.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hi, Great question! We appreciate your loyalty to GE Appliances and we'd be happy to help. All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. Let us know if you have any further questions. Take care! -Sylvia@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs the stainless steel really stainless steel or just a color

Asked 4 years ago by Ryan.

• A:Answer Hello there, Thanks so much for reaching out. We're happy to answer your question. The stainless steel on this microwave is actual stainless steel. The door handle is a stainless steel appearance. We hope this helps. Wishing you well! Mike@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat material is the door to the microwave. Is it stainless steel or is that just a color

Asked 4 years ago by Debby.

• A:Answer Greetings, We appreciate you reaching out and are happy to answer your question! The white door is mostly plastic and metal components. It has a white metal mesh screen in the window. We hope this helps. Keep in touch! Mike@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionOUR JVM7195FL1DS stopped heating and has been taken out for repair but it’s taking way too long to let me know if it can be fixed. I would like to replace it with same model What is the new equivalent model I should look for.

Asked 4 years ago by Dc.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Black

• A:Answer Hi, Thanks for asking! We're sorry to hear about your previous model and we'd be happy to help you find a replacement. We found that model JNM7196FLDS would be a great option. It is almost identical to your current microwave oven and comes in the same color. You can view this model in the following link: https://www.bestbuy.com/site/ge-1-9-cu-ft-over-the-range-microwave-with-sensor-cooking-black-slate/6240431.p?skuId=6240431 Hope this helps! -Sylvia@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat's the average installation fee for a GE over the range microwave ?

Asked 4 years ago by calc4al.

• A:Answer $130-150 which should include free delivery

  Answered 4 years ago by sphera

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHow much clearance do I need from the bottom of this microwave to the top of my electric smooth top range?

Asked 4 years ago by Suz.

• A:Answer Found this when I was looking to replace our microwave - "The National Kitchen and Bath Association recommends that the bottom of the microwave should be no higher than 54 inches above the floor, which would allow for 18 inches of clearance between the microwave and the typical cooktop height of 36 inches. Some manufacturers allow smaller clearances." Although the bottom of our microwave is exactly at 54", our glass-top stove sits slightly higher so the clearance is 17". Builder installed the original microwave at that clearance, and we have not had any problems.

  Answered 4 years ago by KathyC

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan the surface light - the light underneath, be programmed to turn on/off at a certain time....like on at 6am and off at 6pm?

Asked 4 years ago by SueB.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hi, Good question! We appreciate you asking and we'd love to help. We found that this model does not have a programmable surface light. This means it must be turned on/off manually. Thanks for asking! -Sylvia@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat us width, depth, height

Asked 4 years ago by Kreamks.

• A:Answer Hi, Great question! We appreciate your interest and we'd be happy to help. We found that this model measures 29-7/8" W x 16-1/2" H x 15" D. Thanks for checking with us! -Sylvia@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question