A:AnswerIf your speakers are 6 to 16 ohms, yes. If needed, this receiver accommodates both A&B speakers together, which gives you 4 speaker sound and those relaxing cricket chirps sound like an army of crickets? Bose bluetooth-free space landscape speakers? Purfect!! I would recommend it if so. This receiver has great sound. I hope I was able to help
A:AnswerHi Bluetooth, unfortunately, renaming the Bluetooth name of this receiver is not possible. For more information about the Bluetooth settings, please refer to pg.27 and 28 of the link below. I hope it helps. Regards, ^Ron
https://docs.sony.com/release//Manual_4726907111.pdf
A:AnswerHi Hihowareyou,
If your rokit 8 speakers speaker impedance is within 6-16ohms, you can connect the speakers directly to this AV Receiver. Check these link for more information.
https://www.sony.com/electronics/support/articles/00023429
https://docs.sony.com/release//SPECS/STRDH190_mksp.pdf
Regards,
-David
A:AnswerThe Bluetooth has an approximate range of 30 m or about 98 feet. Other paired devices can interfere with the connection, like microwaves, a wireless LAN and obstacles can also affect the connection.
A:AnswerHi WVMan, No, the unit is not designed for an external equalizer. You may refer to this link for more information:
https://www.sony.com/electronics/support/articles/00025111
~Ralph
A:AnswerCannot use 2 pairs (4 speakers) at 8 ohms. This receiver has a minimum of 6 ohms. Using 2 speaker pairs of 8 ohms, the receiver will "see" a total of 4 ohms. This will send the receiver into protective mode - or possibly damage the receiver.
A:AnswerHi rjpatty,
Channels are actually the number of speakers you can connect with the unit. So 5.2 meaning you can connect 5 speakers and 2 subwoofers.
Regards,
David
A:AnswerHi Hippy, Thanks for your inquiry. The current line of Sony® receivers do not have a tape monitor loop. For this reason, it is not possible to connect an add-on equalizer/amplifier to current Sony® AV receivers.
NOTES:
Most Sony® receivers feature a built-in Digital Signal Processing (DSP) Equalizer. The addition of an equalizer is not needed and would provide no additional benefit to the overall sound output of the receiver.
Regards,
Sam
A:AnswerHi ByAngelwings, Thank you for your interest in the STRDH190. With 8 ohm loads, both channels driven, from 20 Hz – 20,000 Hz; rated 90 watts per channel minimum RMS power at stereo
mode. Also make sure that the speakers are within the impedance rating of 6-16 ohms. Hope this helps! -Sam
