A:AnswerYes, other stackable Samsung dryers that are a standard 27-inch width can be stacked on top of the WF220ANW washer using the SK-5A stacking kit accessory.
Thanks for your question,
Ms. Samsung
A:AnswerThank you for the question. The model numbers provided, WF229ANG and DV229AEG, are not current models. If the numerals in your washer and dryer model numbers are actually 210, 219 or 220, or another Samsung front load washer and dryer model that was designed for the U.S. market, then the answer is 'yes'; the SK-5A stacking kit is compatible. If you're still unsure, please feel free to include a picture of the model and serial number tags from your washer and dryer in a new question, or call 800-SAMSUNG to speak with an agent who can confirm the correct model number for your laundry pair. A comprehensive listing can also be found in the drop down menu on the product registration page of Samsung's website.
- Ms. Samsung
A:AnswerYes, the SK-5A stacking kit is compatible with both the gas and electric DV330 dryer models, as well as the matching WF330 washer.
- Ms. Samsung
A:AnswerWe appreciate your interest. However, we can't advise you to install another manufacturer's stacking kit and dryer on the Samsung washer.
Thank you,
Ms. Samsung
A:AnswerThanks for the question. Each bracket should be installed with a total of four screws: two at the top attaching it to the dryer; and two at the bottom attaching it to the washer. It is usually necessary for one person to lift up on the dryer in order to align the holes for the screws while another person screws them into place since the tension created by the weight of the dryer resting on the bracket helps to stabilize the units and prevent the wobbling. The screws should also be screwed in all the way; it's difficult to tell from the picture you attached, but it looks as though the screw is only partially in place.
Please also make sure the long plastic brackets are in place on the sides of the dryer so they help to support the dryer as it rests on the washer; this should also help to prevent movement of the dryer during the washer's spin cycle. It may also help to adjust and tighten the legs on the washer to ensure it's perfectly leveled so the Vibration Reduction Technology can be most effective.
- Ms. Samsung
A:AnswerThe WF330 and DV330, as well as other Samsung front load models, are curved in the front which results in the bottom of each unit being deeper than the top. They are designed to stack so this curvature in the front is aligned. In order to accomplish this, the back of the dryer must overhang the washer by a few inches. The stacking kit is designed to accommodate this overhang.
- Ms. Samsung
A:AnswerThanks for the question. Both the long chrome-colored plastic pieces and one pair of the steel brackets that comes in the SK-5A stacking kit should be used when stacking the dryer on top of the washer. The steel brackets that attach to the back of the washer and dryer are critical for keeping the dryer attached securely; the longer side brackets help to reduce vibration and keep the dryer centered on the washer. They snap into place then are secured with screws on the bottom of the dryer prior to lifting it on top of the washer, and also help to provide a buffer between the dryer and washer. I would suggest contacting Best Buy for assistance completing the installation.
- Ms. Samsung
A:AnswerSamsung stacking kits should come packaged with their installation instructions. The current kit model number is SK-5A which includes two sets of brackets. One set is sized for smaller units and is similar to the earlier SK-3A kit; the other is similar to the SK-4A and fits the larger capacity models. The instructions for installing the brackets is the same; the difference is in the spacing of the holes.
I hope this helps clarify.
- Ms. Samsung
A:AnswerThanks for the question. The SK-5A stacking kit actually comes with two sets of brackets, one set that's sized to fit many of the same models as the SK-3A, and another set that's compatible with other models that the SK-3A would not fit. It would be necessary to know which model you're considering in order to determine whether it would be compatible with the SK-3A brackets.
- Ms. Samsung
A:AnswerYes, the SK-5A stacking kit can be used to stack the DV520AGW gas dryer on top of the WF511ABW front load washer.
Thanks for your interest,
Ms. Samsung
A:AnswerYes, the chrome SK-5A stacking kit is designed to compliment all the different Samsung stackable washer and dryer colors, including white.
- Ms. Samsung
A:AnswerYes, the DV203AES dryer can be stacked on top of the WF203ANS washer using the SK-5A stacking kit accessory.
Thanks for the question,
Ms. Samsung
A:AnswerFor availability of the SK-5A stacking kit, which can be used to stack the DV203 dryer on top of the WF203 washer, please call 888-BEST BUY or contact your local Best Buy Appliance Associates.
Thank you,
Ms. Samsung
