A:AnswerIt will but note that the stylus overhang for the AT-VM95C/H comes set at 15.5mm and the overhang specified in Technics SL23 documentation is 14mm so you may want to back the cartridge up 1.5mm.
A:AnswerNo, it will not. You must use the ANGLED headshell that was provided with your AT-LP3 Turntable. Get the AT-VM95E Cartridge (cartridge only) instead.
A:AnswerIt will fit, the only thing you will need to check on is the stylus overhang distance. Our Headshell/Cartridge Combo Kits come with the overhang set at 15.5mm. We have not been able to determine what the stylus overhang distance for the Denon turntable is, we advise being within .5mm of the turntable manufactures specified stylus overhang distance.
A:AnswerIt will not. You can use the cartridge itself, the AT-VM95E, but not the headshell. Your turntable has a straight tonearm and an angled headshell, you must use the Sony angled headshell.
A:AnswerOur Headshell/Cartridge Combo Kits come with the stylus overhang distance set at 15.5mm, the AT-LP120-USB Turntable calls for a stylus overhang distance of 16mm. We recommend stylus overhang be within 1mm of that specified by the turntable manufacturer, so the AT-VM95EN/H is good to go out of the package with this turntable.
A:AnswerIt will fit but is not the best match for the tonearm in terms of cartridge suspension compliance. If you replaced the headshell with one of a lighter weight, say this 6.7-gram model available from Parts Express, Part #230-010 the compliance would be better suited to the lighter effective mass of the tonearm assembly.
A:AnswerIt will, but please note a couple of things, you will need to adjust the stylus overhang distance from 15.5mm, which it comes preset at, to 14mm which is the distance specified for your tone arm and make certain that you are NOT using any sub-weight in the end of your tonearm. The cartridge + headshell weight range for your tonearm without a sub-weight is 11 to 16.5g. The AT-VM95E/H Headshell Cartridge combo kit weighs 15.5g.
A:AnswerThe AT-VM95E/H Headshell/Cartridge Combo Kit may be used in place of your existing headshell/ATP-2 Cartridge (with AT-N2 Stylus). Make sure you recalibrate (balance and zero out) your tonearm and set the tracking force (stylus pressure) accordingly after installing the AT-VM95E/H.
A:AnswerNo, it will not. The cartridge itself is not replaceable, it is an integral part of the tonearm. Only the stylus assembly can be replaced and it should be replaced with the same model stylus, the ATN3600L Replacement Stylus.
A:AnswerYou can use the AT-VM95C cartridge, but not the headshell which comes with the AT-VM95C/H Headshell/Cartridge Combo Kit. Your turntable features a straight tonearm so you are required to use the angled headshell that was provided with it.
A:AnswerStylus overhang comes set at 15.5mm on our Headshell/Cartridge Combo Kits. Check your turntables documentation for the specified stylus overhang distance, not all of our turntables have the same overhang specification. It is always best to check alignment after installation in the event something moved. No, it will not fit a P-mount type tonearm.
A:AnswerIt will not, the JVC L-F41 Turntable uses a straight tonearm with an angled headshell; the angled headshell must be used in order to maintain the correct cartridge alignment. The headshell on the AT-VM95C/H Headshell/Cartridge Combo Kit is straight, not angled, and this would cause the alignment to be way off. You would need to mount the AT-VM95C Cartridge to your existing headshell.
AT-VM95C Cartridge
https://www.audio-technica.com/en-us/at-vm95c
