Questions & Answers

Q: QuestionHow is the Ring Alarm Keypad powered?

• A:Answer This keypad is powered by a rechargeable internal battery.

  Read More

Q: QuestionWhat is the maximum wireless range of the Ring Alarm Keypad?

• A:Answer The maximum wireless range is 250 feet.

  Read More

Q: QuestionI have the first gen system i think and the keypad charge port is broke. Will this work with everything i currently had or do i have to replace it all?

Asked 4 years ago by Mac2.

• A:Answer Thank you for reaching out to us regarding your Ring Keypad question. Yes, all Ring Alarm devices are compatible with each other, so a 2nd Gen Keypad will work with your current Ring Alarm system. If the charger port broken, we first recommend reaching out to Ring support for a possible warranty replacement. All of our devices come with a limited 1-year warranty! If you have any additional questions, please feel free to reach out through our Ring Community peer-to-peer forum: https://community.ring.com/. Thank you, Jamila with Ring

  Read More

  Answered 4 years ago by Ring

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan two different Gen 2 keypads be synced? Meaning.....can I have a keypad downstairs and the keypad upstairs? Thanks.

Asked 5 years ago by 12Patriots.

• A:Answer Yes. I have 3.

  Read More

  Answered 5 years ago by Bryan0087Verified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionHow do I arm and dis arm key pad

Asked 3 years ago by Corvette63.

Q: QuestionI bought Ring system for my house and garage. I have a Ring Alarm Keypad in my garage that emits sound. Last summer it got 110 degrees F and the Ring Alarm Keypad doesn't work anymore. What can I do to produce sound in the garage?

Asked 4 years ago by Anonymous.

• A:Answer Is it fully charge? Have you try to call Best Buy about the issue?

  Read More

  Answered 4 years ago by BillSVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes the base have a stay home future

Asked 5 years ago by Greatdeal.

• A:Answer Yes

  Read More

  Answered 3 years ago by KurtVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDo you have to purchase the base or can I purchase the keypad and door sensor and be set?

Asked 5 years ago by Misty.

• A:Answer Hello Misty, Good question! The Ring Alarm Base Station is the center of your entire Ring Alarm security system and is required for the keypad and sensor to work properly. Here is a helpful article elaborating on this further: https://support.ring.com/hc/en-us/articles/360040525211-Ring-Alarm-Base-Station. For any additional questions or concerns, please feel free to reach out on our community forum at https://community.ring.com/. Thanks, Alexis with Ring

  Read More

  Answered 4 years ago by Ring

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDoes this have Z-wave? Compatible with which Schlage Smart Locks?

Asked 5 years ago by AutoFL8Brian.

• A:Answer Yes , z-wave communication. But rather sure this does not communicate directly with Schlage locks that are z-wave.

  Read More

  Answered 3 years ago by KurtVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionis there a recessed type adapter to mount/hardwire keypad without a cord hanging outside to a plug? Thanks for your reply. D

Asked 5 years ago by bigbro.

• A:Answer I want to unplug my Ring Alarm Pad, and carry it to set up in my bedroom. In the morning, after I wake up, I want to unplug the pad and bring to back down srairs and replug at ge rear exit. Can I do this?

  Read More

  Answered 2 years ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionCan this ring alarm key pad also work in Mexico?

Asked 5 years ago by Marc.

• A:Answer As long as you have internet service, and cellphone service, it should work. If you purchase the additional monitoring service, you might have a problem

  Read More

  Answered 5 years ago by MattKVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes the keypad emit an alarm sound too or does that only come from the base station?

Asked 5 years ago by Chris.

• A:Answer Keypad sounds as well as base station.

  Read More

  Answered 5 years ago by blshof

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this finally address the blinding battery charge indicator when the the unit is plugged in? I don't see the battery indicator anymore- does this mean the new unit is finally bedroom friendly when plugged in?

Asked 5 years ago by AudiPartsMan.

• A:Answer Simple fix, put a piec of electrical tape over it, with a pinhole in the tape. Or put round circles of masking tape over it, the more pieces, the dimmer that it will look

  Read More

  Answered 5 years ago by MattK

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this work with the (gen1) ring? can they be used together.?

Asked 5 years ago by jane.

• A:Answer Yes, not a problem

  Read More

  Answered 5 years ago by MattKVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (4)

Q: QuestionWill this keypad work with the original ring system and hub?

Asked 5 years ago by Tony.

• A:Answer Hi Tony, Good question! Yes, the Ring Alarm Keypad (2nd Gen) will work with the original Ring Alarm. Replacing your old keypad is an easy process. Before you begin, make sure your Ring Alarm is disarmed. Then you will want to remove your old keypad. Visit our support center to view the proper steps: https://support.ring.com/hc/en-us/articles/360061491711-Replacing-your-1st-generation-Ring-Alarm-Keypad. Ring Community launched in March 2019 to help deliver the most current news and educational information to our neighbors. It is our first peer-to-peer community forum, giving our customers the ability to help one another and share their feedback/experiences with Ring. Please reach out at https://community.ring.com/ if any additional information is needed regarding your Ring Alarm concern. All the Best, Nicole with Ring

  Read More

  Answered 3 years ago by Ring

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionIs this backwards compatible?

Asked 5 years ago by Tony.

• A:Answer Hi Tony, Great question! Yes, the Ring Alarm Keypad (2nd Gen) will work with the first generation Ring Alarm. Replacing your first-generation keypad is an easy process. Before you begin, make sure your Ring Alarm is disarmed. Instructions for removing your old keypad and adding your new one can be found here: https://support.ring.com/hc/en-us/articles/360061491711-Replacing-your-1st-generation-Ring-Alarm-Keypad. Ring Community launched in March 2019 to help deliver the most current news and educational information to our customers. You can find tips and tricks from other Ring users at https://community.ring.com/. This peer-to-peer forum allows our neighbors to share their feedback and experiences to assist each other in resolving their concerns. All the Best, Nicole with Ring

  Read More

  Answered 3 years ago by Ring

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: Questionhow do I charge this keyypad. a charger did not co.e with it.

Asked 2 years ago by Anonymous.

• A:Answer Hello. Thanks for reaching out. The Ring Alarm Keypad connects to power using a USB power supply and cable. These should be included in the box. You can use the keypad plugged in or unplugged. It takes a few hours to charge the internal rechargeable battery, and it should last for about 7 months, depending on usage. We invite you to reach out to our Community if any additional information is needed regarding your question. The Ring Community is our first peer-to-peer community forum, giving our customers the ability to help one another by sharing their feedback and experiences with each other. All the best, Nicole from Ring.

  Read More

  Answered 2 years ago by Ring

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionHow do you change batteries in 2nd generation keypad? There’s no place to change a battery that I can see.

Asked 2 years ago by Kimreywagner.

• A:Answer USB charging cable. Note: the cable does not go in easily and will not charge until fully seated. I know this sounds crazy, but I had to use a screwdriver to fully seat the cable.

  Read More

  Answered 1 year ago by jeffb

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)