A:AnswerSounds like the set you want is to listen to the TV and speakers at the same time. I check with most manufacture i.e. Sennheiuser, Bose, Soney, they do not have any set up that will work for your application, and I think you will not find one . Hope this helps, The Tv's may have a capacity to give you sound but possibly not at the same time for what you might want to use them for.
A:AnswerSearch Results
Web results
Pulse-code modulation - Wikipedia
https://en.wikipedia.org › wiki › Pulse-code_modulation
Pulse-code modulation (PCM) is a method used to digitally represent sampled analog signals. It is the standard form of digital audio in computers, compact discs, digital telephony and other digital audio applications.
A:AnswerYou cannot use this item to get audio directly to headphones, there is no headphone jack. It takes a digital audio signal from a source ( TV, cable or SAT converter box, etc.) and converts it to an analog signal ( RCA jacks, red and white, left and right) to input into a receiver/amplifier that has no digital audio input jacks (RCA analog only).
I have an older amplifier that I will not get rid of because it's so good but it came out just before digital audio was the norm so all I have are analog RCA input jacks.
Headphones will only connect to amplifiers typically unless you have a source ( TV, cable or SAT box, Blu-Ray, DVD) that may have headphone jack.
If your TV has no audio out, this device will not get you what you need.
A:AnswerIt’s worth a try. You can always return it within their timeline for returns. I have an older dvd/surround system (over 10 years old) It doesn’t have an optical input to plug into my new smart tv. The analog converter is my working solution. I’m spoiled on surround sound, tv speaker sound just doesn’t do it for me.
A:AnswerNo, there is no provision for a headphone jack.
This device will take a digital output from a source (TV, cable/SAT converter box, etc.) and convert to an analog signal (RCA jacks) to an amplifier/receiver which should have a headphone jack.
If you have a newer amplifier with digital audio inputs you do not need this device.
A:AnswerUnfortunately, many of the newer TVs no longer feature RCA connectors, the little round red and white inputs common to vintage sound equipment. But such newer models do have digital optical outputs, which can generally produce a better connection than the older RCA connectors. To connect an older soundbar (with RCA inputs) you will need something like the Insignia Digital to Analog Converter, which, when connected from the TV with an Optical Audio Digital Toslink Cable and then from the Converter with a standard two wire (male red and white connector) RCA connector to the Soundbar will provide a viable connection. Make sure the two cables (Toslink and RCA cord) are long enough to reach from the TV to the Converter and then to the Soundbar, which in most cases will not be too lengthy. Also, expect better quality if you purchase better quality cables. The standard cheapo cords that are often included with big box store stereo equipment will do the job, but you may get improved sound for a few dollars more expenditure. Hope that helps.
A:AnswerHi.
TV usually have Optical OUT. This device converts this optical into RCA (Red and White) OUTS. If your Home Theater have RCA INS, you should be able to get sound from the Youtube to the home theater.
Charles V. - Insignia Support
https://www.insigniaproducts.com/contact-us
A:AnswerHi.
It's likely it will work. My best advice is pick it up and if it does not what you expected, you can always use the 15-day grace period Best Buy offers as a store for returns.
Charles V. - Insignia Support
https://www.insigniaproducts.com/contact-us
A:AnswerIF YOUR PARTICULAR MODEL OF BOSE SOUNDOCK HAS AN AUX AUDIO INPUT EITHER RCA TYPE JACKS OR A 1/8INCH 3.5 MM JACK THEN YES YOU CAN USE THE DIGITAL TO ANALOG CONVERTER BOX WITH IT AND THE SAMSUNG TV AS LONG AS THE TV HAS A DIGITAL OUTPUT CONNECTION.
A RCA TO RCA CABLE COMES WITH THE CONVERTER BOX BUT IF YOUR BOSE USES A 3.5 MM AUX INPUT JACK THEN YOU WOULD NEED TO BUY AND ADAPTOR CABLE WITH RCA PLUGS ON ONE END AND A 3.5MM 1/8TH INCH PHONE PLUG ON THE OTHER END AND THEN YOUR IN BUSINESS.
HOPE THIS HELPS.
A:AnswerYou need to make sure the connection is orange and a digital cox connection for it to work. The receiver needs to have the orange connection for the digital cox for this connector to work.
