Customer Ratings & Reviews

I love the way this case looks so much. It is beautiful, great craftsmanship, decent cable management, and good airflow. It is very heavy, as should be expected with 4 glass panels. The mirror black looks amazing because when it’s off you can’t see in it at all, but when you turn it on, the rgb shines through great. You must be careful with the panels and the stand offs for the top and front panel though, as they are plastic. Just be mindful! I replaced the fans, so I have 6 Corsair ll120 fans, 2 on my h100i rad at the top, 3 in the front, and one in the back. Rgb strips, of corse. Definitely great for looks. Some complaints though, the sp120 fans it comes with are older Corsair fans and they are loud with limited rgb options. You must also be prepared to buy a second fan hub, and at least a lighting node pro. Even replacing the fans, the logo is registered in Icue as an so fan so it needs its own hub. So lnp channel one is used for my 6 ll120s connected to a fan hub. The second lnp channel is used for the logo. If you want strips you need another lighting node pro. And you need to be really good at cable management. Instead, I got the commander pro, to give me more control. Expect to spend more money. And the reason I didn’t give it five stars, the logo for the psu shroud didn’t not work at all, with the fan controller. When I hooked it up to my lnp, it is seen by the icue software, and I can turn the light on, but it flickers, a lot. Like randomly turns off and on to the point where I have it turned off right now. I have my fan hub connected to my commander pro, and my strips and psu shroud connected to the lnp. I am going to try moving the strips to the commander pro so that the only thing on the lnp is the psu shroud to see if that helps. Hours of research shows that this issue is common though. So be prepaired for that. Also, fingerprints everywhere. It’s easy to fix and should be obvious that this would happen but still worth noting. Otherwise I love it, and if I can get the psu shroud led to work properly, I would give it five stars in a heartbeat.

This 4 sided tempered glass case is just beautiful to look at. Bought this for my first pc build and I just love it. I was able to manage my cables pretty well inside this case. Does come with three rgb fans but I swapped them out for some corsair LL fans and bought additional LL fans and an aio cooler in order to synchronize the rgb and manage the fan rpms. Will require a little more work to manage cables behind the motherboard because it is tempered glass and so the cables will be visible.

Very beautiful case and easy to build in wish I would have gotten two

This is an awesome case with a lot of air flow but it shows all finger prints and anything else on the glass. Also have to do a lot of cable management due to glass all over the case. Looks amazing but a lot of work!! Also would have liked the ability to change case lighting to something other than white.

This case is such a huge upgrade for my machine. The tinted Mirror Black glass is awesome to see, especially with the RGB shining through! No regrets on this purchase!

Let me say that this has the best looks I've seen in a new case in a long time being sleek and sexy. However, with it being mostly glass you have the downside of fingerprints and smudges however they come out easy with a microfiber cloth that most should own and if you don't you're going to need it with this case. From the cable management to the included RGB I can't complain. The front IO has ample features and enough room for a double rad up top or triple rad on the front (I have and have tried both and both fit comfortably). I have ran dual 1080ti's and a 7900k (not a flex) and have had no issues with cooling or dust as the built in filters work perfectly and enough cooling to run a 7980xe Easily if you truly wanted. Corsair has hit the mark on this one and I love it. BONUS- the fans included are full RGB for all those who want to RGB everything and they are pretty decent quality as corsair is the king of fans (IMO). Cons- Water-cooling (if you wanted) would be somewhat tight however you could still absolutely do it. Nothing else to mention as it's a pretty darn good system and why I keep coming back to corsair. Design- 10/10 from cable management to the airflow, no detail was overlooked and this is truly Durability- 10/10 and you're probably like "but its all glass" and you're exactly right. You knew what you were getting into and you will have to be a little more careful since this is mostly tempered glass however it's not going to break for no reason and everything else is made to a high quality. For this I give it a 10 because you can tell in looks, feel and heft that it's going to last. Quality- 10/10 I cant complain about anything and haven't had any issues. Corsair is known for its quality and customer service. Cost- 8.5/10 you pay a little more because its all glass and as always the RGB tax. I wish it wasn't as pricey but I don't regret paying for it either. Practicality- not going to give a score for this as this is more of an enthusiast level case and you're paying for things you don't need like RGB (that can be argued for some of you), all of the glass and so forth. You buy this because its sexy and the best, you can get a $50 case that cools and will do fine but you pay the big money because this is the finest looking baddie you can get. Conclusion- If you have some extra money left over in your budget and you want the best looking case that catches eyes this is THE case. Even my enthusiast friends drool over this and I wish they made one big enough for an E-ATX and I would have 7 of these sitting around. Would absolutely buy again no regrets. Thumbs up if this helped!

There’s a lot I like about the case. The overall space to work with is great but the metal frame easily flexes under its own weight. The glass and grates look very slick and lit fans pull the look together. I have to deduct stars for construction quality and poor design decisions. The filters are built into cheap plastic standoffs that hold the glass on the top and front. This means you cannot use the glass without the filters and if you do it is nothing more than super cheap plastic. The space for cable management and covers make for super clean management. The hdd and ssd drive sleds are made of the same cheap plastic and are MASSIVE. No clue why. It’s really almost the perfect case but it’s dumb and flimsy at a very high price point. The integrated fans/buttons are weird. I have a love/hate relationship with how Corsair decides to split their fan lines compatibility wise. It’s tough to understand and had to return multiple fans and purchase the commander to make everything work together. With all this plug and play I can see the method to the madness, but I can’t see why the case wired buttons couldn’t be plugged into the mix and be reprogrammed using icue or something. In general the case is quite expensive, cheaply made, and due to the difficult to understand lighting ecosystem on corsairs part I ended up spending WAY more than I initially intended to simply move my build to a new case and have some centrally controlled lighting. This case plus the commander plus more fans with an led hub came out to something like $450. The fans that come with the case are low quality so they don’t do really any of the cool stuff the other Corsair fans do. All in all this case is just not a great deal and I don’t know if I’d purchase Corsair anything again. I feel shorted for the amount of money spent on it all.

Without a doubt the best looking case I have ever purchased. The mirror finish makes it near impossible to see anything inside when off - blends right in with the rest of the room. Great size for expansion. That being said, it's also got quite a heft to it but that was to be expected with something that has so much glass. Glad I was able to pick it up locally and not have it shipped as I'm sure cracked and broken glass would have been a nightmare to get taken care of. Has a couple minor defects that were present right out of the box, but nothing major enough to deduct an entire star for.

Case is very nice. Allows you to show off the RGB build for all the panels. Case can be heavy, but that's a given due to tempered glass. The only downside would be keeping this clean from finger prints. The filters (top and front) for the fans and intake help keep internals cool and dust-free. I have mounted my Corsair AIO radiator to the front of the case due to fan sizes and motherboard clearance and haven't had any issues with internal temperatures.

I love this case. It is quite large so you can fit big GPU's or whatever in here if you need to and still have good airflow. It's also very sturdy because of the heft of the glass panels. I love the transparency that the panels bring. It makes it look bare without it actually being bare. Only negative is that they are finger print magnets so try not to touch it too much!

Best case ever!! Lovely design, Corsair does not disappoint. It has a high price for a case but its so nice to have. It's basically eye candy, I keep looking at it all the time. It was my first time dealing with tempered glass panels and it ended without a problem. It looks so easy to clean the filters, I think this is the first issue everyone has to look for since maintenance is important and it is as easy as taking off 2 panels and using a vacuum cleaner or water to clean, this is so easy. Most cases are case filter type and they are both stuck together its much harder to clean if you just clean the outside. Taking off and putting the tempered glass panels is very scary cause you do not want to scratch or break them. It wouldn't be an issue since tempered glass breaks into a million pieces so cleaning up is easy and you won't get hurt if it breaks. Of course, your pride and desktop case will be hurt if it breaks. My oc pc runs at a nice cold temperature compared to an aluminum or metal case. The ventilation in this beast is amazing. The bigger the space the hot air can be move around and dissipated. I think this would be nice for a water cooler type desktop build but mine is all air cooling type build and it's fantastic, both air cooling and water cooling are great for this case. The psu also has a bottom filter and you do not need to unscrew anything it slips out easy but be careful not to grab or touch that part when you move the case it might break in if you use any sort of force. The filters are super small and super amazing quality!!! Nothing gets in but air! Also the side panels have space in between case and screw so air can come in and out making it easy for heat and air to escape. A small downside not make motherboards have a type c input built into the "inside" of the motherboard because most of them have one or 2 on the port panel side. The lights on this are a very nice touch and has space for more lights on the mobo, it's easy to configure with the buttons on the outside, there's also buttons on the inside of the case. This would look great with more corsair gear I'd you love corsair. Imagine having a corsair chair next to this case.

Great looking case and quality built. Just know it’s glass and that can be a pain. Also had to rma two panels as they were marked up out of the box. Corsair was good to work with. Grab another fan for the rear.

This case is definitely a head turner. Rgb comes through quite well for it being a mirrored glass. Glass gets smudged easily but not a huge deal

Overall I'm quite happy with my purchase. The build quality is great, and everything is running as should be expected. However, I do have a small issue; One of the fans in the front of the case will, occasionally, buzz. It stops once things get up and running, but during powerup it's quite noticeable, and fades away. It's odd, and slightly annoying, but otherwise it's fine. It's also a wonderfully roomy case! Very easy on setup and cable management. So while I knock off a star for the fan buzz in my particular case, my experience overall is still very good, just not perfect.

This case was my choice to use on my first build. I have been extremely impressed with it. I ended up using two of the fans that came with the unit has the fans on an all in one watercooler. I primarily did this so that I could use the Corsair iCue 'ecosystem' for controlling the RGB. I would recommend if you go with this case that you do your best to buy other corsair RGB components as it makes it much simpler to integrate unified RGB control. I waited until the last minute to take all of the clear plastic off of the glass to keep my fingerprints off. Keep in mind that the corsair controller that you get with case only works with the SP fans (or HD if you replaced all of the ones that came with it). If you use this controller for the bottom logo and side logo you'll only have space to control 2 more SP fans. I ended up buying the commander pro and ordering a 3 pack of SP120's to complete the case. This worked great as I have full control over the entire case now through iCUE. The other thing to note is the USB C from the case may not have a connection on the motherboard depending on which motherboard you choose. I think it's a great addition to the case. For my motherboard I need to buy a USB C pci board to be able to use it. Just a heads up. Overall I'm extremely pleased with this case and would purchase again!

Easy to work with, great cable management, good airflow, and fantastic air filters. This is a great case. My only wish is that the screws that hold the glass panels on didn't require a hex screwdriver... it makes cleaning the filters a bit of a chore.

The glass scares some away but in all honestly if you take care of your PC its not a dust collector and it looks shiny and the fans work nice and good no pc wire management issues easy to install

This case is great. Looks awesome and has great airflow. If you are installing additional fans you'll need an additional controller as they may not work with the controller that comes with the case. Also, cable management in the back may be tricky.

Ecellent air flow, awesome lighting, gets dirty easily and requires cleaning of the glass allot.

I swapped out my gaming desktop's original case from OriginPC and put the components into this case...and WOW does it look beautiful. Also, for those readingthe reviews about the power supply container being open on the right-hand side, this issue has now been fixed and is fully enclosed so that you do not have to see wires hanging out.