Customer Ratings & Reviews

Not sure why some people are concerned about thermals, air cooler compatibility and what not with this case, but my i9 12900K stays at 27c idle, hardly reached mid 60c in load and around mid 80c in stress. GPU temps stays 37c or low idle, never seen GPU crossing 76c with RE4 Village or Tiny Tina's Wonderland @ 1440p. My other PC with Corsair 5000X RGB case shows 40C on idle with similar setup. All your components have enough space to swim in the case. Also, a little wide but looks very nice, cables are hidden 100%. And dont worry the case looks way nicer in real than in pics. Heres's my setup: 2 exhaust on top. 2 intakes on bottom. 3 intakes on side, right next to vertical GPU. 1 exhaust on back. 2 additional passthrough fans between bottom and upper layer. HW Details: i9 12900K with Noctua NHD15 (ugly fan version) 32GB DDR4 3600 AsRock Z690 Steel Legend MOBO Asus TUF GDDR6X 3060 ti (the 600+ GB BW version) Thermaltake GF3 850 Gold 4 HDDs + 3 m2 SSDs

pros: you can see inside the case no matter where you put it looks really good cable management is easy can handle any size motherboard lots of room for fans and radiators 5 USB ports on front cons: heavy big (could also be a pro)

Case is pretty big but only thing i disliked was that a 4080 euro card doesnt fit without taking one bottom tray covers out because jta about a inch n a half to long to not have to which sucks cuz now you can see the power supply cables if u look inside the case but other then that case is cery nice

Awesome case and easy to work with and routing everything, definitely recommend having some fan extension cables ready though just in case the cords run short. Plenty of room for upgrades and customization.

This is the best pc case! Thermaltake knocked it out of the park with this one. If you’re looking to have phenomenal airflow, and to be able to customize your parts to be a one of a kind personal build, this case is perfect. I’ve found that I can even use it with a 4090 gpu, and the sideways motherboard orientation is great for keeping the stress on the mouthed board PCIe ports down. Can’t recommend highly enough!

Very large case. Alot of working room to allow easy cable management. Unique design looks great! Sturdy case does not feel cheap.

Love this case. Everything is on display. Installation is made super easy on this case and plenty of room to hide your cables.

Case is different from most cases. If you have a monster gpu like I do with a 4090, it will take a slight modification by removing one of the internal shelves that’s designed to be removed. Has plenty of mounts for fans to keep things cool. And also it’s very tall and big compared to a lot of other cases.

Plenty of books and crannies to tick wires away in. Seems to do relatively well.

very big case that allows for your parts to be seen very good. would recommend

Case is awesome wish it had more options for mounting the cooler but other than that no complaints

I fell in love with this unique case the first time I saw it, so I just had to get it for my build. I accidentally bought the tower 100 thinking it'd fit mATX but it doesn't (the 200 does). I thought I might as well get the 500 sinse I wanted the glass on the sides. It is very easy to build in and adjust things. Only issue is that two of the usb ports got damaged so they're unusable, but I can't use them eitherway so it doesn't really matter to me. She's very big and I plan on decorating her even more since there's so much space.

Kudos to Best Buy and UPS for getting me this case two days earlier than expected. The specifications on this chassis are a bit deceiving. I was looking for something I could get better airflow on my XFX Merc310 RX 7900 XT. This case said it would support a 355mm graphics card. It did not say you had to take half the floor out of the case. If you want the basement fans blowing up into the case as I intended, you have to give up the capacity to install a 360mm AIO. Unless you don't mind it being secured by two screws. For the size of this thing, it doesn't support many fans. Probably better suited for a custom water loop. But if you're doing that, you're not buying a $160 case from BB. I DO NOT by any means suggest this case unless you are a well seasoned builder.

This case is beautiful. However, it’s a fair bit bigger than i expected, even though it doesn’t actually fit a strix card without removing the bottom panel. It’s much closer to the tower 900 than i thought it would be. Cable management is tough, and there are two USB 3 cables (so if your motherboard only has 1 header you will be left without 2 functioning ports), but i don’t regret it because the case is truly gorgeous.

Got this case on a whim expecting the cable management a the back of the mobo to be horrible based on positioning. Well color me impressed because it's perfect and I'm indeed happy with the look of the final product.

Very nice case, incredibly spacious though requires a bit of work to make certain components fit correctly.

I enjoy the case, obviously not all the room in the world but will fit a 360 and 240 radiator. Comes with 2 okay fans

I like this case. A little overpriced but it's definitely a breath of fresh air from the usual case design. The ability to remove virtually every panel is awesome!

I love the build soaciouse clear good air flow nice opportunies for a powerful pc

A little fiddly to set up but once you get everything how you want it....OMG! Best looking case out there!