Gemini - XGA 5000W 2.0-Ch. Amplifier - Black
Specifications
- Continuous Watts x Channel @ Ohms550 Watt x 2 @ 4 OhmNumber of Channels2Network Connector(s)No network connectors
- Key Specs
- Continuous Watts x Channel @ Ohms: 550 Watt x 2 @ 4 Ohm
- Number of Channels: 2 (The number of discrete channels of sound output. This can be a single number or multiple numbers separated by decimal(s). The first number is the primary, horizontally directed audio channels. The number after the first decimal, if applicable, is the number of subwoofer outputs or channels. The number after the second decimal, if applicable, is the number of height or atmospheric channels designed to immerse the listener by producing overhead sound effects.)
- Network Connector(s): No network connectors
- General
- Brand: Gemini
- Model Number: XGA-5000
- Product Name: XGA 5000W 2.0-Ch. Amplifier
- Color: Black
- Audio
- Continuous Watts x Channel @ Ohms: 550 Watt x 2 @ 4 Ohm
- Total Power Handling: 1100 watts (How much amplifier (amplified) power (wattage) that can be handled before damaging the product.)
- Number of Channels: 2 (The number of discrete channels of sound output. This can be a single number or multiple numbers separated by decimal(s). The first number is the primary, horizontally directed audio channels. The number after the first decimal, if applicable, is the number of subwoofer outputs or channels. The number after the second decimal, if applicable, is the number of height or atmospheric channels designed to immerse the listener by producing overhead sound effects.)
- Minimum Frequency Response: 10 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Total Harmonic Distortion: 0.1 percent (Measurement of the harmonic sound distortion. The lower the percentage, the cleaner the sound.)
- Maximum Frequency Response: 50 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Amplifier Type: Power amplifiers
- Signal-to-Noise Ratio (SNR): 100 decibels (The ratio of the desired signal's strength to the level of background noise. A ratio higher than 1:1, which equates to greater than 0 decibels, indicates more signal than noise.)
- Sensitivity: 0.77 decibels
- Audio
- Impedance: 4 (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Inputs
- Video Only Inputs: No video only inputs (The number and type of video signal only inputs the product has.)
- Network Connector(s): No network connectors
- Speaker-Level Inputs: false (Also referred to as high-level inputs. Enables the amplifier to receive a sound signal from another device that does not have RCA, or low-level, inputs.)
- Line-Level Inputs: true (Also referred to as low-level inputs. Enables the amplifier to receive a sound signal from another device via RCA cables.)
- Outputs
- Speaker Connection Type: RCA, XLR
- Video Only Outputs: No video only outputs (The number and type of video signal only outputs the product has.)
- Features
- App Compatible: false (The product can be connected to a program or software application on a mobile device, which then receives collected data from the product.)
- Fan Cooled: true
- Bridgeable: true (Bridging an amplifier increases the power it supplies to the speaker(s).)
- Dimensions
- Product Height: 3.5 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 19 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 13.8 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 26.7 pounds (The out of box weight of the item.)
- Warranty
- Warranty - Parts: 1 year
- Warranty - Labor: 1 year
- Other
- UPC: 747705204448
Bring powerful sound to the DJ booth with this Gemini professional power amplifier. The lightweight design allows for easy transport to and from venues, and the built-in fan keeps the unit cool. With DC output and short circuit protection, this Gemini professional power amplifier keeps your speakers and other equipment safe from power surges.
- 5000W total power: RMS rating of 550W x 2 @ 4 ohms, 2 channels driven for robust audio.
- 8 ohms impedance: Efficiently conducts power.
- Protection circuit: Ensures safe operation.
- Rack-mountable design: For flexible placement options.
- 5000W total power: RMS rating of 550W x 2 @ 4 ohms, 2 channels driven for robust audio.
- 8 ohms impedance: Efficiently conducts power.
- Protection circuit: Ensures safe operation.
- Rack-mountable design: For flexible placement options.
Whats Included
- Gemini XGA 5000W 2.0-Ch. Amplifier
- Gemini XGA 5000W 2.0-Ch. Amplifier
Q: What is the impedance of this amplifier?
A: This amplifier has an impedance of 8 ohms.
Q: What type of protection does this amplifier offer for my speakers?
A: This Gemini professional power amplifier features DC output and short circuit protection to keep your speakers safe from power surges.
Q: Can this amplifier be rack mounted?
A: Yes, it has a rack-mountable design for flexible placement options.
Q: Does this amplifier have a built-in fan?
A: Yes, this amplifier has a built-in fan to keep it cool during use.
Q: What is the total power output of this Gemini amplifier?
A: This Gemini professional power amplifier has a total power output of 5000W.
A: Yessss
Q: would need two to bi-amp? klipsch rp280?
A: In order to bi-amp two speakers, you would indeed need two of these... Unless you're using this to supplement a decent AVR that you can dial in to be one of the two amps of the bi-amp system (probably AVR for highs and this for lows, since the THD on this isn't spectacular and i think you'd notice it less just pushing low end.). TLDR if you just have a preamp for your source, you will need two of these to bi-amp a pair of RP280's
Q: How do you connect this to an existing receiver to add power to my speakers?
A: I don't know what receiver you have but if it's a high end receiver it should have pre-outs, that you would use to hook up this amp to. What you would be doing is basically bypassing your existing receivers' amps and using this amp. That's because all of your speakers would now be connected to this amp. So, I would be asking myself, would adding this amp improve the sound and if so, by how much to justify the cost of this amp. Note: If your not using XLR then your not getting the most out of this amp. You would want to use this amp with a Maranth pre-amp like the AV7706 or if your really have more money to spend, the AV8805. Remember, this is Magnolia.
Compare similar products
Bring powerful sound to the DJ booth with this Gemini professional power amplifier. The lightweight design allows for easy transport to and from venues, and the built-in fan keeps the unit cool. With DC output and short circuit protection, this Gemini professional power amplifier keeps your speakers and other equipment safe from power surges.
Give your home’s soundtrack a boost. The Bose Music Amplifier powers up to two pairs of passive speakers with 125 watts per channel and connects over Wi-Fi so you can stream all your favorites, from playlists to podcasts, easily from your phone. To elevate your sound experience, pair the amp with Bose in-ceiling or outdoor speakers and custom EQ will deliver clear, well-balanced sound. Enjoy the simplicity of controlling your music with the Bose Music app, or stream content your way via Bluetooth, Apple Airplay 2, Spotify Connect, and Chromecast built-in. For more music throughout your home, group the amp with other Wi-Fi -enabled Bose products. SimpleSync technology lets you pair it with a compatible Bose headphone or Bluetooth speakers for private listening or more sound. When it comes to your record player, connect easily for maximum enjoyment of your vinyl collection or allow guests to take over the vibe by pairing via Bluetooth.
This two-channel rack-mountable amp's got power - 1000 watts! Each input takes RCA, XLR, or ¼" phono. Control each channel with an illuminated knob. A clipping LED reminds you to turn it down if your signal is distorted. Use in stereo, mono, or bridge mode for maximum output. Connect your speakers using the two Speakon inputs, or use the shock-free banana plugs on the back. The heavy duty fan with aluminum heat sink and protection circuit guards your equipment for optimum performance.
The Dayton Audio® BSA-200 high-power bass shaker amplifier is designed and built specifically to power tactile transducers but works equally as well as a dedicated subwoofer amplifier. It delivers 110 watts RMS per channel into 2 ohms in stereo mode, and in bridged mono mode - when both amplifier channels are combined into 1 - it delivers high-power monaural output of 230 watts RMS into a 4-ohm load. An ideal choice for adding a new dimension of exciting bass energy to your home theater or gaming setup, the BSA-200 seamlessly integrates with bass shakers, ButtKicker® transducers, and sound exciters to transform your audio environment into an immersive, tactile adventure that you not only hear, but also feel! Its compact design is ideal for tight spaces, whether under a couch or a gaming chair, and the included bracket makes installation a breeze. The balance and frequency knobs let you dial in the desired output and crossover (adjustable 50 Hz to 200 Hz), giving you total control over your setup. RCA in/out can be used to connect multiple BSA-200 amps, and the USB can be used to run audio from your main amp to the BSA-200 wirelessly with the Dayton Audio® Wave-Link WLS (sold separately). The included wired remote provides convenient volume adjustment and a power button. From explosions in movies to road rumble in gaming chairs, the BSA-200 produces a commanding, physical dimension to make bass frequencies to more immersive and captivating than ever before.
Specs
Reviews
Customer Images
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
- Rated 5 out of 5 stars
Great power nice price
Great power for the price nice clean sound. I was suprized to find this amp for such a good price.
This review is from Gemini - XGA 5000W 2.0-Ch. Amplifier - Black
chuck Posted
- Rated 2 out of 5 stars
Not impressed
Bought this amp to replace a very old Carver amp that runs my subwoofer in my home theater. The unit I got had one bad channel. The left side input did not function so there was no way I could use it in mono bridged mode. I decided not to replace it as the fans in it were really really loud. Too loud for home use. I could see this as a great amp to haul around and crank out sound for parties etc where the fans would keep it nice and cool and the fan noise would not be an issue.
This review is from Gemini - XGA 5000W 2.0-Ch. Amplifier - Black
Emabie Posted
- Rated 3 out of 5 stars
...to loud.
This has power but it is way too loud for studio recording. Needs to be in another room if using indoors.
This review is from Gemini - XGA 5000W 2.0-Ch. Amplifier - Black
Nightwolf Posted