“In my case, the cord is falling short by few inches. Any recommendations on which extension cord to use?”

1-1 of 1 Answer

• USE A MINIMUM OF 12/3. THE LOWER THE GAUGE THE THICKER THE WIRE, ANYTHING SMALLER THAN 12, SUCH AS 14 OR 16 GAUGE IS TOO SMALL AND ANYTHING BIGGER THAN 12 (IE 10 OR 8 GAUGE) IS OVERKILL. A 12/3 WILL HANDLE A 2,000 WATT ELECTRIC CHAIN SAW. 10 AMPS AT 120 VOLTS IS 1200 WATTS FOR REFERENCE.

  Answered by TomTechGuy 5 years ago

  Helpful (0)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.