Customer Ratings & Reviews

I love this printer! I also have an X1C, but I find myself using this printer more often even for smaller prints. Larger prints work great as well. Machine is fast and works well. I thought very hard about the H2D, but the price was just too high and I did not like that the entire build volume was not usable, but it is with this printer.

I’m beyond frustrated with Bambu labs products. I have over 6 years of 3d printing experience I haven’t had this much issues with printers since the creality ender days where you had to manually adjust and replace stuff to make it reliable. I’ve had creality, flash forge printers and switched to Bambu when they were kick starter. I had the p1s then added ams unit and had over 4,xxx hours on that printer and never had any issues beside ams tubes clogging but otherwise the printer it just worked. Then I had A1 mini which was another fantastic printer no issues. I regret getting rid of those printers. I had 4 p2s printers each of them failed range from 10 hours to 65 hours, got tired of returning to exchange so I bought the h2d which I’ve have for a few weeks and this was a nice upgrade and the print quality were fantastic and the unit runs quietly however after 67 hours I ran into failure after failure with the printer don’t matter the print file is or filament I should have listened to my buddy about the issues he had with his h2d and h2c. Had reset printer 2 times reversed update, new update, dry filament, change hot ends, recalibrated several times doing auto, and manually nothing works, print quality is horrible every print there holes or it just doesn’t put filament down in the correct spots, nozzles constantly leaking filament even with the nozzle blocker. don’t matter on temp settings that’s using Bambu and sunlu filament didn’t have any issues until then. Parts stick to bed fine but the print head will pull part off due to the other nozzle leaking filament and it gets into print. The ams has been nothing but problems every single ams slot when in use says high tension detected in said slot please check filament. It would do it every other print. I’m not sure what happen to Bambu quality control but this wasn’t what I was expecting. Having constant down time I can’t print for the game store I print for and or people. Gonna look at a different brand or go back to a p1s for reliability. I wouldn’t buy this.

I’ve been really impressed with the H2D. It’s fast, reliable, and honestly just fun to use. The print quality has been excellent, and I love how little I have to mess with it to get great results. Easily my favorite 3D printer I’ve owned.

I’ve been really impressed with the H2D. The large build volume makes it versatile, and its dual-nozzle system handles multi-material prints flawlessly with no contamination and minimal waste. Setup was straightforward, and the built-in monitoring system works smoothly. I’ve also noticed it’s slightly more precise than my P1S. That said, if you don’t plan to take advantage of the dual-nozzle, multi-material printing capabilities, I’d recommend going with the H2S instead—it’s more affordable and still an excellent machine.

Ive had Bambu lab printers in the past, so I have come to expect greatness. This one did not disappoint. It's big enough to do a lot of things. Print quality is amazing like all bambu lab printers. If you are on the fence about one of the other H series printers, just get this one. It does everything the others do but you can do multi colors and materials. It's also pretty fast. No problems or complaints. Just a solid printer.

I highly recommend this printer I’ve been using it for about a month and it has been amazing. I’ve been printing to create merchandise and it is pretty accurate and you can start printing from your phone. If any error comes up it gives a QR code with simple instructions and sometimes a tutorial video on what to do. I highly recommend this. I haven’t had any trouble printing from my laptop and phone over WiFi. Two of the pictures are of the 3D prints it did and one is when it was being created.

Love this printer, faster than my h2d and bigger and worry free so far

Great printer, Work very fast and with no issues, setup is very quick and easy!

Its easy, its reliable, the support network is vast. Its high dollar but worth every penny. Happy printing

This was an upgrade from my first 3d printer. I have to say that it is always running in my shop and has provided great quality prints. I would by 3 more if I could.

This is the 7th Bambu H2C that I have bought from Best Buy all have arrived in fast and great condition. I am very please with Best Buy and Bambu products. I find Bambu one of the easiest 3D printers to use. I bought my first Bambu print at the age of 67 I didn’t know anything about printing. I have learned with ease thanks to Bambu how to print some amazing thing. What a great hobby.

Great product and lots of fun! Unpacking from box and setting up can be done with little to no instruction. Working the bugs out require a bit of technical expetience and maintenance know how...if you know, you know. This is our second H2C for our shop and it definetely had isdues out if the box which took a few days to fine tune. The video URL codes can be helpful; but, they seem to show other models with similar problems which is not useful. I find it best to youtube the problems and watch vidros from someone that has been working on them for years. Overall, we are pleased with the products we make and look forward to a few more H2Cs in the future.

my original order online for printer got cancelled after i ordered it. i then went online and found another city near by and was able to order one they had being shipped. its been constantly used almost 24/7 since received with no problems and very easy to use

The Bambu Lab H2C AMS Combo has been fantastic so far. Setup was easy, the printer looks awesome, I love the lighting, and every print I’ve done so far has come out great. My only real complaint is the filament setup for the left nozzle. Since the other nozzle already has the AMS included, I wish Bambu had included a single-filament AMS for the left nozzle as well. Manually changing that filament is enough of a hassle that I usually just leave the same color loaded. I’ll probably end up buying the single AMS just to make swapping colors easier. Aside from that, I’m extremely happy with the printer. It works great, looks great, and I honestly wish I had more of them.

This is my 3rd Bambu printer and the best so far. Minimal maintenance downtime, great print quality, better automation than my A1 and P2S, and because of the dual nozzle Vortek system, there is virtually zero filament waste, which is probably the biggest advantage.

This is a great machine! I already have two P1S and wanted to go little bigger and have the dual extruder. It prints so nice and my two color prints have 0 waste! Love this machine! Making me want more!

If your looking for a printer that just works and has a large print bed then the H2D or the H2S are the printers to buy. This printer produces premium quality prints without having to fiddle with settings and guess work.

I’ve been really impressed with my Bambu Lab H2S so far. The print quality is excellent, and the printer has made 3D printing much easier and more enjoyable for me. I especially like how fast and consistent it is, while still producing detailed prints. The H2S has been a great addition to my setup, especially for larger projects and cosplay pieces. Bambu Studio and Bambu Handy also make managing and monitoring my prints convenient. Overall, I’m very happy with my purchase and excited to see what I can create with it next!

I’ve seen some people online so they had issues with it damaged in shipping and some had issues printing after they got it right away but so far I have dozens of hours on this thing already and it’s everything I could’ve expected. Little disappointed that for $1500 which includes the AMS2 pro they don’t include the power supply for the AMS so that you can dry your filaments and you have to buy that extra, for that reason I’m giving it four stars because bambu already has tons of things they can sell you and that a power supply really didn’t need to be one of them.

Amazing machine, I highly recommend getting the H2C Combo. I added a ASM and a AMS-HT and it is awesome. I have a AMS on left nozzle, AMS and AMS-HT on the right nozzle. It is fast and efficient. If you load the filament correctly it can shed hours off a long print. I replaced the 0.2mm Induction Hotend with an additional 0.4mm and that gives me an extra dedicated color without having to purge.