See more imagesHighly rated by customers for:
jfcooley Posted
Bought because wanted the MagSafe and didn’t need charging. Works very well, just wish it came in black. Holds iPhone 12 Pro securely over bumps and on a dirt/gravel road. The vent mount holds ver well. I will say that it is a bit overpriced.
katatonix Posted
The MagSafe Vent Mount Pro Car Holder for the iPhone Magnetic phone Mount is sleek and simple in it's design. And yet it works to very, very well on bumpy dirt roads, roads with small potholes, unexpected bumps in the roads, etc., keeping your phone securely mounted to the phone mount if you occasionally encounter on of these items. The mount provides a strong magnetic connection to any iPhone 12, 13, 14 Pro Max & Mini, including if they are in a magesafe approve phone case that will work easily with the mount. The only two downsides are that: 1. If you encounter a very large or deep pothole that you cannot avoid, you will need to secure your phone by placing your hand over it momentarily. Otherwise, the jostling of the car by the hole will inevitably knock your phone of the mount and onto your floorboard as happened to me once. 2. Lastly, this mount does not work on cars with circular air vents. So be forewarned. It only works with vertical and horizontal air vents. So, to sum it up, I really enjoy the Belkin MagSafe Vnt Mount. It's not as intrusive or bulky, it's easy it install and move around from vertical to landscape position and it keeps my phone where I can see it - out of my way but in reach if needed. I highly recommend it to anyone looking for a good phone mount for their car or truck.
JasonB Posted
I'm using this with an iPhone 13 Pro Max and so far it's been flawless in my 2017 Subaru Crosstrek/XV. I only mention the car model because - based on some of the reviews I've read - some might have a different experience based on the vents in their car. This Belkin mount is clamped around the top 'fin' of the vent, as seen in my picture. If I had chosen a lower fin, the bottom of the phone would make contact with the car-stereo below it and might dislodge the iPhone should I run over any significant bumps in the road. Note: The mount does wobble a bit over rough terrain. Also, I've never used the mount in horizontal orientation and can't attest to its performance as such.
JordhenW Posted
To start off, I know every vehicle is different and it’s hard to make a one-size-fits all; if this was specially for my car (Toyota Prius) I’d give this two stars. But the grip meant for air vents is too loose for the spot I found, while it’s not loose enough for the other possible spots. My phone tends to swing to the side when I’m making a turn, and after a few days of putting it on and off, the magnet tugs the holder partway off the air vent and makes it flop (for lack of a better word). It’s easy to push back when parked, but if it starts to slip while driving… yeah, not safe. Still, when it’s in, it holds the phone and the swinging around doesn’t make it loose in the first day; I’ve just tried to “re-push” it in every morning to keep it stable. At the same time though, this being one-size-fits all means it should be good for future cars I have. Hopefully it’ll fit better then. (Also, I said “no” for recommending the item but I’d say “Not sure” if that was an option. Depends on your situation.)
Posted
Hi, JordhenW,
We appreciate your honest feedback. We must learn where we can improve, and we’re focused on making things right for our valued customers like you. Allow us to assist you further with this. Please call our phone support team through the hotline numbers listed in this link: https://www.belkin.com/support-article?articleNum=55022.
Regards,
Marie
Belkin Support
<img src="https://s3.amazonaws.com/stratos-logos/logos/Belkin.png" alt="Belkin" title="Belkin" style="display: block !important; margin-top: 2em !important; border: 1px solid #ccc !important; padding: 2px !important; background-color: white !important;" />
Dani Posted
This is a great accessory to use in the car! Works great with MagSafe iPhones and holds the phone great!
Nevetmore Posted
Works great with my tech21 evo check, if you have speed bumps near you do what I did and go out your way to make the car bumpy. Make sure it doesn’t fall and hold your hand under. This thing is great and survived my test and it fits my pro max 14 perfect.
Music Posted
Holds an iPhone 14 pro max fine. Love how it just holds the phone securely. I have vertical vents and it works just fine. Is a little pricey but works very good haven’t had the phone fall off at all. Gave it 4 stars because the phone does bounce a little. Overall I’m satisfied with it compared to other vent mounts.
CindY Posted
It is great! I can either talk or find out where I’m going, while I drive safely! Love it! I’ve always trusted belkin brands for apple products!
Happy Posted
This phone holder is great. When we go out we have a camera on our dog so we can make sure she is doing OK. She has anxiety separation and doesn’t like to be left alone. She eventually falls asleep.
AntAppFan8 Posted
Works very well! I have a Dodge Challenger and it sticks in the vent very well. I haven’t had it fall yet! The MagSafe magnets in the apple phone case helps over the phone magnets.
artist Posted
The best iPhone holder ever. If you used with original apple case it’s ok. With other brands it can fall on the big bumps.
RobP Posted
This MagSafe mount works very well and is sturdy. When removing my phone it doesn’t fall off the vent. Very secure when my phone is attached.
Alex Posted
Love this product! Holds my phone perfectly hasn’t fallen and I can still feel my vents. Thank god it came with no damage. How it was delivered was terrible.
Mogainhawaii Posted
Best ever for holding my phone in the car. It works way better than other ones I’ve had
RockinmyFireTV Posted
Loving it. Seamless and easy on my phone. Simply the best.
Cono017 Posted
Great product, use it in my car every day, doesn’t move.
jason Posted
Not all air vents are the same. Depending what model your car is, it probably wont fit and its useless. Overall im satisfied what Ive purchase. 40$ is a bit high thou.
Posted
Hi jason,
We are grateful that you took the time out to leave us a review. The Belkin WIC002 is designed to work with vehicle's vent slats of up to 3 mm in thickness and of up to 20 mm in depth. The vent mount works best with straight, horizontal vent slats, but can also work with vertical vent slats. When using with a vertical vent slat the mount may move slightly if the mount is overloaded with weight.
Our phone support team is just a call away should you need assistance. The hotline number is listed here: https://www.belkin.com/us/support-article?articleNum=55022, or email us at [email protected].
Regards,
Carl
Belkin Support
<img src="https://s3.amazonaws.com/stratos-logos/logos/Belkin.png" alt="Belkin" title="Belkin" style="display: block !important; margin-top: 2em !important; border: 1px solid #ccc !important; padding: 2px !important; background-color: white !important;" />
DarellaJ34 Posted
Very reliable for a iPhone 14plus as a Patrol Officer. No Hands Free violations and the device is portable so that I could transfer to my personal own vehicle.
Posted
Hi DarellaJ34,
Thanks for taking the time to leave us positive feedback. We're glad that the Belkin MagSafe Vent Mount Pro works well for you.
If you need assistance, you can email us at [email protected] or call our support hotline which can be found here: https://www.belkin.com/support-article/?articleNum=55022.
Regards,
Kyla
Belkin Support
<img src="https://s3.amazonaws.com/stratos-logos/logos/Belkin.png" alt="Belkin" title="Belkin" style="display: block !important; margin-top: 2em !important; border: 1px solid #ccc !important; padding: 2px !important; background-color: white !important;" />
Airpods Posted
Love how it’s magnetic and the phone just stays on it.
Amazing Posted
This car vent mount gets the job done it holds my phone very well on straight and on bumpy roads for navigation. Although it’s an expensive car phone mount but it’s worth though!