HP - HPE Standard Power Cord - 8.20 ft Cord Length - IEC 60320 C15 / NEMA 5-15P - White

HPE Standard Power Cord Black - 6 ft cable - AC 110 V voltage rating - 10 A current rating - 2 Connector ends

Need an IEC C13 power cord for a computer, monitor, printer, or server used with an Australian or New Zealand wall outlet? This 10A/250V cord uses an AS/NZS 3112 (AS3112) Type I Australia power plug and an IEC 60320 C13 connector for equipment with an IEC C14 inlet, providing a direct mains connection without a travel adapter or voltage converter. The H05VV-F 3G 0.75 mm² cable is covered by KEMA-KEUR certificate 2163330.02, and the MSL-107 IEC C13 connector is covered by VDE/ENEC Marks Approval 40029298. Compatible with any equipment that uses an IEC C14 appliance inlet and stays within the cord's 10A/250V rating; verify the Australia plug type, inlet shape, and local electrical requirements before use. Best for: computers, monitors, printers, servers, and other C14-inlet equipment used with Australia or New Zealand outlets; Not for: IEC C5, C7, or C19 inlets, loads above 10A/250V, travel-adapter use, or voltage conversion.

Need a replacement IEC C13 power cord but want a thicker-gauge option for a workstation, office setup, or longer cable run? This 16 AWG heavy-duty AC power cord uses a molded NEMA 5-15P plug for a standard U.S. grounded outlet and an IEC C13 connector for equipment with an IEC C14 inlet; it is rated 13A at 125V and gives buyers a more substantial computer power cord option than a light-duty cable. Compared with smaller-gauge conductors of the same material and length, 16 AWG has lower conductor resistance, so the gauge becomes more meaningful when cable length increases or when equipment operates closer to the cord's rated load. Molded NEMA 5-15P and IEC C13 ends support routine workstation moves and IT replacements; the SJT jacket is marked 105°C / 300V, and the current drawing states that relevant materials comply with RoHS requirements. Best for: desktop PCs, workstations, monitors, printers, servers, powered speakers, and other IEC C14 equipment within 13A at 125V; Not for: IEC C5 cloverleaf, C7 figure-8, C19, or equipment above the cord rating.