
Elevate your entertaining experience with immersive 3D sound. The power of Samsung sound bar Q65T makes surround soundbar comes to life with speakers that fire all around you.
A: Hi Brian - The HW-Q65T Rear Speakers connect to the wireless module, which allows you to place these three units in the back of your room. One wire is required to connect each rear speaker to the wireless module. Then plug in the power cable to the module. The “wireless” convenience is in connecting your soundbar and any other speakers at the front of the room to the rear speakers – this can now be done via Wi-Fi through the wireless module, eliminating any clutter of long wires running the length of your room. ^Gina
A: There are several ways to connect. I used a optical cable to connect from the back of the TV to the soundbar. You can also use HDMI cables. You can do it wirelessly with bluetooth - but the sound quality is not as good as optical or HDMI cables. Once the cable was connected my 2 year old Samsung TV 'talked' to the soundbar and they setup the connection without and involvement by me.
A: Hi Dave! The HW-Q65T does not support Dolby Atmos. Thank you for bringing this to our attention, we will get this corrected. Dolby Atmos support begins with our 2021 HW-Q600A Soundbar and above. ^Gina
A: Make sure your WiFi routers has some distance from your speakers. The WiFi and Bluetooth signals clash and make it drop in and out. Worked for me, but router was right next to speaker. Now it’s across the room and my issue is resolved
A: Hi FLJohnJ! The HW-Q65T Soundbar features Acoustic Beam technology as well as DTS Virtual:X, which provides 3D directional audio from up-firing speakers providing immersive, room filling sound making it a great choice to pair with any TV. ^Tim
A: Hi! I’m sorry to see that you are having difficulties with the HDMI ARC connection. So that we can better troubleshoot towards a solution, please reach out to Samsung Support at: 1-800-SAMSUNG, available 8AM - 12AM EST, 7 days a week, or Chat with us on Samsung.com: https://www.samsung.com/us/support/contact/ ^Tim
A: Hi Emfivemore! You cannot adjust the center channel individually, however you can try to manually optimize your sound quality with the following steps: Press and hold the SOUND CONTROL button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between -6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to “STANDARD”.) ^Tim
Q: If you want to hook up the speakers with wire instead of wireless, do you have that option?
A: Hi Jay! The rear speakers included with the HW-Q65T will wire to a transmitter base which is then wireless to the soundbar. You cannot wire the speakers direct into the soundbar. ^Tim