SKB - iSeries Waterproof Hardshell Microphone Case for 12 Mics 3i-2011-MC12

SKB Cases Injection Molded 2U Studio Flyer Rack Case. Introducing the world's first injection molded carry-on studio rack case. The 1SKB-iSF2U Studio Flyer is a powerhouse of innovative features packed into a compact, convenient carry-on size. Boasting a virtually indestructible injection molded shell that is both lighter, stronger, and less expensive than the previous 2U Studio Flyer, the 1SKB-iSF2U also features front and rear molded-in square rack rails pre-installed with cage nuts for an extra element of security and durability for sensitive equipment on the go. Improved quiet-glide wheels, an easy-to-operate pull handle, and an unbeatable Lifetime Warranty all help to create the ultimate transport solution for studio gear today. Laptop work surface: 19" x 11". This case comes with Travel Sentry Approved locking latches installed. Using Travel Sentry Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. Product Features: Compact carry-on size. Waterproof & impact-resistant. Innovative molded-in front/rear rack rails. 2U rack and laptop combo case. 8 rubber cleats to hold laptop into position during transportation. 11.46" rack depth. 1.26" front rack rail to front door depth. .75" rear rack rail to rear door depth. Laptop work surface: 19" x 11". Cord pockets measuring 7.73" W x 1.67" H x 1.93" D. Quiet-glide wheels & pull handle. Made in the USA. Lifetime Warranty. This case comes with Travel Sentry Approved locking latches installed. Using Travel Sentry Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. Product Specifications: Exterior: Hard. Built In Wheels or Casters: Yes. Rack Units: 2. Front Rail To Back Lid: 12.25 in (31.12 cm). Rail To Rail: 11.25 in (28.57 cm). Rear Rail to Front Lid: 12.75 in (32.38 cm). Product Weight: 15.32 lb (6.95 kg). Exterior Length: 21.75 in (55.24 cm). Exterior Width: 13.875 in (35.24 cm). Exterior Height: 9 in (22.86 cm). Shipping Weight: 16.63 lb (7.54 kg).

Gator Cases presents the GM-06-MIC-WP Waterproof Wired Microphone Case from the Titan Series, a heavy-duty storage solution designed to protect up to six handheld microphones. Built with an impact-resistant NK-7 resin shell and a custom-cut foam interior, this case ensures each microphone remains stationary and shielded during transit. The IP67-certified construction provides a dustproof and waterproof seal, further supported by immersion test certification to keep sensitive equipment dry in challenging environments. For professional travel, the case meets ATA-300 standards and features a secure Powerclaw latching system alongside pad-lockable points that comply with Mil-STD-810F security specifications. Transport is facilitated by an ergonomic soft-grip handle, and the compact 13-inch by 10.75-inch footprint makes it a practical addition to any mobile recording, rehearsal, or live sound setup.

SKB Cases iSeries 2015-10 Yamaha DM3 Digital Mixer Case. The 3i2015-10DM3 features a high quality foam interior that has been form cut to fit the Yamaha DM3 or DM3-D. There is a large accessory pocket below the mixer that measures 17.25" long by 8.5" wide and is perfect for storing the power supply, cables, and other accessories. It is 2" deep near the pull-out handle side of the case and 5.5" deep by the wheel side. SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H). Product Features: Fits the Yamaha DM3 or DM3-D. Accessory pocket measuring 17.25" x 8.5" (2" deep on handle side; 5.5" deep on wheel side). Built-in pull handle and wheels. Ultra high-strength polypropylene copolymer resin. UV, solvent, corrosion and fungus resistant (MIL-STD 810H). Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H). Automatic ambient pressure equalization value (MIL-STD 810H). Resistant to corrosion and impact damage. Continuous molded-in hinge. Trigger Latch System. Rubber over-molded cushion grip handle. Locking loop to accept a customer supplied lock. Product Specifications: Exterior: Hard. Built In Wheels or Casters: Yes. Product Weight: 16.4 lb (7.44 kg). Exterior Length: 23 in (58.42 cm). Exterior Width: 18 in (45.72 cm). Exterior Height: 11.5 in (29.21 cm). Shipping Weight: 18.27 lb (8.29 kg)