Unique Bargains - 30pcs 2.2uF 100V CBB21/22 Metallized Polypropylene Film Capacitor for Electronics and Lamps - Red
Reviews coming soon
About this product
These Film capacitors are widely used in home appliances and various electronic applications, such as various electronic filtering, DC isolation, bypass, step-down coupling, DC and pulse circuits. They can be widely used in power supply circuits, energy-saving lamps, electronic rectifiers, instruments, meters, televisions, radios and home appliances. They are also suitable for repairing electronic equipment and DIY circuit boards.
Features
30Pcs 2.2uF 100V Film Capacitor
The package contains 30 Pcs polypropylene film capacitors; Model: CBB21/CBB22; Voltage: 100V; Capacitance:225J 2.2UF; Tolerance: ±71%; Pin Style: Straight Pin; Pin Pitch: 7 mm / 0.28 inch; Size: 30 x 9 x 5 mm / 1.18 x 0.35 x 0.2 inch(L*H*W)
CBB capacitors are made of metallized polypropylene film, with reliable and stable performance and low dielectric loss. They are self-healing, non-polar, have high insulation resistance, and excellent frequency characteristics (wide frequency response).
The product parameters are clearly printed and easy to identify. The small size makes it easy to store and use. It uses straight pin radial leads and through-hole mounting, which is easy to install.
Before starting the installation, make sure the power is disconnected and the remaining power in the circuit is discharged. Use a soldering tool to firmly connect the CBB electrolytic capacitor to the corresponding position on the circuit board.
Do not allow the voltage in the circuit to exceed the rated voltage of the capacitor to avoid damaging the capacitor.
Specifications
- BrandUnique BargainsModel Numbers26081900ux8445Product Name30pcs 2.2uF 100V CBB21/22 Metallized Polypropylene Film Capacitor for Electronics and LampsColorRedAmperage0 amperesProduct Safety Certifications and Standard(s)Not Applicable
Reviews
This product doesn't have any reviews yet.
Compare similar products
These Film capacitors are widely used in home appliances and various electronic applications, such as various electronic filtering, DC isolation, bypass, step-down coupling, DC and pulse circuits. They can be widely used in power supply circuits, energy-saving lamps, electronic rectifiers, instruments, meters, televisions, radios and home appliances. They are also suitable for repairing electronic equipment and DIY circuit boards.
Siemens Type QD circuit breakers are UL classified for use in specific Square D load centers in place of Square D QO circuit breakers (see listing on back).For easy reference, a panelboard compatibility list is provided with each circuit breaker. All QD breakers are supplied with load side connectors suitable for 60/75C wire and are calibrated for 40C maximum ambient applications.
GE, 30a, double pole circuit breaker, 240V, bulk. The product is good to use. The product is highly durable. Manufactured in china. From the Manufacturer This 120/240-Volt GE 30 amp, double pole, thin series replacement circuit breaker is used in a General Electric load center. Typical applications, up to 8,800-Watt, include electric baseboard heat, fan forced heat and 240-Volt air conditioners (up to 23,000 BTU). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.
Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home's electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home's wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of "used" breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so. Manufacturer's Notice http://www.cpsc.gov/cpscpub/prerel/prhtml10/10354.html Manufacturer Remedy Information http://www.cpsc.gov/cpscpub/prerel/prhtml10/10354.html From the Manufacturer Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
