How to use the wand/ And how to put it back/ null

Not as simple as the DC15 I had which is disappointing. Pull up on the red portion and remove, extend tube until it clicks. Always be sure to extend tube until it clicks. To put it back, press button on hose end push long tube into hose while being gentle with hose to ensure long life, ensure hose end is below the rear protruding portion of the gray handle and align in straight up and down position, push red part of tube down into handle, flip red cap at top.

Hi there Carol, this is Tia from Dyson. The extension wand quickly releases with the press of a button, from its holding compartment, when you need to get a long reach and with the tool attachments. To put the wand back in place, you would just slide it back into the holding compartment and use the vacuum's main cleanerhead. If you're ever in need of Dyson troubleshooting assistance, please don't hesitate to reach our support team at questions.us@dyson.com. Thank you for choosing Dyson technology! Best wishes, Tia Dyson Customer Support

Push the tab under the handle the wand releases then you have to jam it back into the hose on the back poorly designed

“How to use the wand/ And how to put it back/”

Asked by Carol 2 years ago

Answer This Question

See all questions & answers

Dyson - Ball Animal 3 Extra Upright Vacuum with 5 accessories - Copper/Silver-Angle_Standard

1-3 of 3 Answers

Not as simple as the DC15 I had which is disappointing. Pull up on the red portion and remove, extend tube until it clicks. Always be sure to extend tube until it clicks. To put it back, press button on hose end push long tube into hose while being gentle with hose to ensure long life, ensure hose end is below the rear protruding portion of the gray handle and align in straight up and down position, push red part of tube down into handle, flip red cap at top.
Answered by RobertM 2 years ago
Sorry, there was a problem. Please try again later.
Hi there Carol, this is Tia from Dyson. The extension wand quickly releases with the press of a button, from its holding compartment, when you need to get a long reach and with the tool attachments. To put the wand back in place, you would just slide it back into the holding compartment and use the vacuum's main cleanerhead. If you're ever in need of Dyson troubleshooting assistance, please don't hesitate to reach our support team at [email protected]. Thank you for choosing Dyson technology! Best wishes, Tia Dyson Customer Support
Answered by DysonProductExpert 2 years ago
Sorry, there was a problem. Please try again later.
Push the tab under the handle the wand releases then you have to jam it back into the hose on the back poorly designed
Answered by Mel78 1 year ago
Sorry, there was a problem. Please try again later.