1-2 of 2 Answers
Hi there, good day! The Frigidaire 13 cu ft Garage‑Ready Upright Freezer model FFFU13F2VW, from available product documentation or spec, based on typical design for similar upright freezers—including Frigidaire models—the power cord and plug are generally positioned on the back of the unit toward the bottom. It's not placed on the left or right side panel, but rather centered on the rear as it exits the compressor housing area. Key points and recommendations: - The door is reversible, meaning you can install it to swing left or right to suit your space—but that does not affect plug placement, since the power cord stays on the fixed back of the cabinet. - The unit comes with a standard-length power cord (approximately 6 ft is typical for appliance cords). If your outlet is further away, consider using a proper appliance-rated extension cord, rated for at least 15 amps and made for refrigerators/freezers. Some refrigerator cords can trip GFCI outlets during compressor startup—users often replace the outlet with a standard one if allowed by code to prevent nuisance trips. - To ensure it meets your needs, it's best to measure the distance from where the freezer will be placed to your wall outlet and confirm if the included cord is long enough. If it's not, plan for an extension or outlet repositioning. Bottom line: - The plug is on the back (not left or right). - It's not user-adjustable on the side. - If you specifically need a "right‑side plug," there isn’t one built into this model. - But since the door swing is reversible, you can set the hinge so the door opens from either side—just know the cord will remain at the back. - Maico
Sorry, there was a problem. Please try again later.The power cord for the Frigidaire FFFU13F2VW upright freezer exits the rear of the freezer on the left side, when looking at the back of the unit. This would be the right side when viewing the freezer from the front. The cord is approximately 6 feet long. - Patrick
Sorry, there was a problem. Please try again later.
