1-1 of 1 Answer
Hi! For information on care and cleaning for model WRS321SDHZ please visit the Owners Manual at https://s3.amazonaws.com/sm-backend-production-attachments/userguide-w10407342-revb-eco.pdf Below are also steps in cleaning the ice maker. Step 1: Remove ice bin from freezer Before cleaning your ice maker, be sure to turn off the unit and disconnect the refrigerator’s power supply. Remove the ice bin from the freezer by placing your fingers into the hole at the base of the bin and squeezing the latch to release it. Once released, lift the bin up and pull it straight out. Step 2: Remove ice from the bin Empty the remaining ice into a bucket or sink and check to make sure that there isn’t any leftover ice frozen onto the bin. If there is, use warm water and a washcloth to melt the ice and remove it. Step 3: Clean the ice dispenser chute If ice is not being dispensed regularly by the ice maker, it may be necessary to clean out the ice dispenser chute located beneath the ice storage bin. Using a warm washcloth, wipe down the chute to melt and dislodge the built up ice particles, making sure to dry it thoroughly once you’re through. Step 4: Clean the ice bin Using a warm washcloth and an approved ice machine cleaner, wipe down the ice bin until it is free from all residue. Be sure to thoroughly dry the bin before placing it back into the freezer. Step 5: Run a few cycles Once you have finished cleaning and replacing the ice maker bin, run and discard a few cycles of ice to ensure all solution has been removed from the system. Thank you for your inquiry about our Whirlpool® appliances.
Sorry, there was a problem. Please try again later.