ASUS - MA-25 2.5Gbps Ethernet over Coax MoCA Adapter (2-pack) - Black

Wow awesome product! These are self configurating units. I used the and a single unit to hard wire my Asus Zenwifi BE 1000 mesh APs. I get incredible speeds form these units. The only issues I had where the third unit would not connect but I called the 800# and I just needed to hit the MPS button to pair the 3rd unit. The other was I have a Asus router/mesh and the router is setup 192.168.50.1 as well as the MA-25 adapters. Once I figured that out I was able to change my routers IP and all all configured itself. Here is the good part, when was done I am getting 1350 to1500 GPS on wifi! I have 1.2GPS from Comcast. I was getting 400 to 500 GPS without the backhaul. Lag time down transfers up what's is not to like.

Works great and was easy to install! Now i have fast internet in my rooms.

Very easy to implement, comes with everything needed to install. It's a great solution in parallel with a wifi extender or a mesh network by repurposing the coax cabling that may already exist in your home. I set this up using that cabling, and connected Eero Pro 6 units via MoCA. This gives a 1 GB, ultra-low latency backbone connection (can support up to 2.5GBps) between Eero nodes. In comparison, using the wifi backbone band, speeds are capped at about 500MB under most ideal conditions. The MoCA adapter solution is a significant speed improvement with no environmental factors causing performance fluctuations. Coupled to a 2GB fiber ISP connection, my current setup is downstairs media using a separate 1GB port on a switch, and the downstairs Eero gateway using its own 1GB switch port. Couple the Eero devices together via the MoCa cabling and now the second floor has access to a true 1GB connection as well. Fully recommend.

Tripled my download and upload speeds. They were easy to install, came with all the gardware needed to mount it to the wall.

I already had 2 motorola MoCA adapters. I could not find additional units so I purchased these Asus adapters to give my mesh satellites a wited backhaul. Once I toned out the lines to identify which coax went to each room I connected the first unit and it was linked in no time. Repeated the process for the second unit and it was just as seamless.