Cable Leader - European Schuko CEE 7/7 to IEC C13 Power Cord, 18 AWG H05VV-F 3G, 10A/250V - Black

This IEC C5 power cord is the right angle power cord for a laptop power adapter or any device with an IEC C6 inlet, feeding it from a continental European outlet with a 90 degree Schuko plug that sits flush to the wall. One end is a molded angled plug — a right-angle CEE 7/7 Schuko (Type E/F, grounded) that fits German, French, Spanish and most continental sockets; the other is an IEC 60320 C5 cloverleaf (Mickey Mouse) connector. Built with 18 AWG (0.75 mm2) 3-conductor stranded copper wire in a black H05VV-F PVC jacket with molded strain relief, rated 2.5A 250V, with VDE and ENEC safety approvals and RoHS-compliant materials. Compatible with any device using an IEC C6 3-pin inlet, including laptop AC adapter bricks, projectors, printers, and monitors, as an angled power cord replacement for a lost EU power cord or a laptop charger cord for Europe. Best for: C5-inlet devices on Schuko or French outlets where a straight plug would stick out. Not for: North American NEMA outlets, UK, Swiss or Italian Type L outlets, C7 figure-8 or C13 inlets, or equipment drawing more than 2.5 amps.

Power your IEC C13-equipped equipment from a European wall outlet with this Schuko (CEE 7/7) to IEC 60320 C13 power cord. The straight inline Schuko plug inserts directly into European Type E/F sockets, power strips and PDUs for a clean, standard connection. It is built on flexible 18 AWG H05VV-F 3G (0.75 mm-squared) cable with a black PVC jacket and fully molded, grounded connectors, rated 10A at 250V for reliable mains power. The C13 end mates with the standard 3-pin C14 inlet found on computers, monitors, printers, PDUs and UPS systems, while the Schuko plug fits grounded Type E/F outlets used across most of continental Europe. Best for: powering PCs, displays and data-center gear from European Schuko outlets, or replacing a lost or damaged EU power cord. Not for: US or Canada NEMA wall outlets, which use flat blades and will not accept this round-pin European plug.

Need to power a UPS, rack PDU, or server with a C20 inlet from a standard wall outlet? This Cable Leader power cord pairs a NEMA 5-15P 3-prong grounded wall plug with an IEC 60320 C19 connector, delivering wall-outlet power directly to higher-power equipment without a PDU-to-device jumper. It is built from 14 AWG, 3-conductor copper wire with a flame-retardant VW-1 SJT jacket and fully molded ends, rated 15A at 125V for indoor use, and the cordset is UL Listed. The C19 connector fits the C20 inlets commonly found on rack PDUs, larger UPS units, servers, and core switches; it is larger than the common C13 and will not fit C14 inlets, and the 5-15P plug limits the cordset to 15A even though some C19 hardware exists in 20A versions. Best for: powering a C20-inlet UPS, PDU, or server from a standard North American wall outlet within 15A/125V. Not for: C13/C14 devices, 20A applications, 250V circuits, or outdoor use.