
Specifications POWER RATING RMS Power (2Ω): 150W x 4/350W x 1 RMS Power (4Ω): 80W x 4/200W x 1 Bridged (Mono 4Ω): 300W X 2/200W x 1 POWER SUPPLY Power Supply: Full PWM Power Supply Threshold: 10.0V-17.0V (DC) Idle Current: (0.7A) DISTORTION THD 4 (1KHz @4Ω): 0.05% S/N Ratio (A weighted @1W): -85 dBA S/N Ratio (A weighted @FP): -101.1 dBA INPUT SENSITIVITY Low Input Level: 200mV-10.0V High Input Level: 200mV-10.0V INPUT IMPEDANCE Low Input Level: 20 KΩ High Input Level: 20 KΩ OUTPUT STAGE Output Impedance: 0.018Ω Damping Factor (50Hz @ 4Ω): >250 Bandwidth (-3dB): 10Hz-35KHz CROSSOVER (-12/-24 dB/Oct) Variable High-Pass: Flat or Fixed 70Hz Variable Low-Pass: 40Hz-400Hz FUSE RATINGS ATC: 60A DIMENSIONS L x W x H: 10.45”x 4.02”x 1.4” (265.6mm x 102mm x 36mm) FEATURES Full Range Class D IR Chipset DirectFET Power Mosfet Output Stage SMD Technology on 4-Layer PCB Board Water Resistant Conformal PCB Board Coating LED Power/Protect Light Speaker-level (high-level) inputs Signal sensing remote turn-on 3-way protection circuitry (thermal, overload, and speaker short protection) Conformal-coated circuit boards Sleek and compact design Water resistant Input sensitivity: Low level: 200mV - 10.0 volts High level: 200mV - 10.0 volts Frequency Response: 10 - 33000 Hz Total Harmonic Distortion (THD): 0.5% Signal to Noise Ratio: -101.1 dB Variable high-pass filter: 50 - 250 Hz Variable low-pass filter: 50 - 250 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation

The Pioneer GM-DX975 5-Channel Class D Amplifier can power your entire car audio system, sending up to 100 watts RMS to each of your front and rear speakers while delivering up to 600 watts RMS to your sub. CTA-2006 compliant, this highly efficient Class D technology keeps this powerful amp running and will fit in a lot of out of the way spaces. The frequency response of the full-range channels stretches up to 50 kHz to support crystal clear Hi-Res Audio certified playback. The GM-DX975 uses high-grade electronic parts and gold-plated RCA connections to ensure maximum performance. Put your GM-DX975 into 3-channel mode to create a strong front soundstage with bass by outputting up to 200 watts RMS each to a set of high-performance components up front, plus up to 600 watts RMS to your sub. The speaker-level inputs allow you to install this amp in a factory system with no RCA connections. The amplifier switches its input mode automatically when it detects the high-level signal, eliminating the need to run a turn-on lead to your receiver or fuse box. Built-in high- and low-pass filters let you adjust the sound for your vehicle's interior, and a wired remote boost that lets you control the amount of bass boost from the front seat.

CX-Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool and an optional remote level control lets you adjust bass on the fly.Five Channels of FunThe CXA660.5 Amplifier is built to be the complete package in one cool-looking amp. This CX amplifier uses powerful Class A/B technology to power four mid/high-range channels and an ultra-efficient Class D power plant for the bass channel. The amp also comes equipped with FIT+™ (Fail-safe Integration Technology-PLUS) giving you superior clarity and dependability. KickEQ™ variable bass boost gives you as much as a 6dB of extra bump with a simple turn of the knob. A powerful 12dB crossover and 24dB subsonic filter is also included letting you quickly tune your entire system to taste. This CX amplifier delivers as much as 90 watts into four full-range channels or 180 watts into two-bridged channels plus as much as 300 watts into one bass channel.FeaturesClass A/B full-range channelsClass D bass channel included for one amp to run an entire systemThree-second turn-on/off delay to eliminate unwanted interferenceVariable 12dB crossovers provides control to dial in perfect soundKickEQ™ 6dB variable bass boost for those additional low frequencies24dB subsonic filter for protection from potentially damaging frequenciesFIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radioAccepts up to 40-volt input signalSmall footprint for easier installationVertical mounting hardware included for another unique lookWhat's in the BoxCXA660.5 5-Channel 90 Watts A/B & D Class AmplifierMounting hardwareOwner's manualSpecificationsPower (watts/ch) 4 Ohm Stereo: 65 x 4Power (watts/ch) 2 Ohm Stereo: 90 x 4Power (watts/ch) 4 Ohm Mono: 180 x 2Power (watts/ch) 4 Ohm Mono Sub Ch: 150 x 1Power (watts/ch) 2 Ohm Mono Sub Ch: 300 x 1CXRC Remote Bass Capable (sold sep.): YesDimensions

Demand maximum power from your car’s audio system with the Altitude Series 1100W 5-Channel Class D Amplifier from AudioControl. The A1100.5 combines premium engineered audio components and advanced technology to deliver over-the-top power with a sleek and modern aesthetic. Equipped with ParaBASS low frequency contouring, advanced HEXFET power MOSFETs, and new features like Valet Mode, this amplifier guarantees outstanding performance for any vehicle.
This product doesn't have any reviews yet.