
Brew the perfect cup or cups with this Cuisinart Coffee Center coffee maker. The 12-cup carafe brewer quickly produces enough coffee for you and your family, and the simple controls make it easy to adjust the strength of your brew. This Cuisinart Coffee Center coffee maker has a built-in single-serve brewer that lets you use your favorite single cup pods.
A: Hi....my machine is doing the same thing. It's exploding the k cups and the grounds are going in my coffee cup and in the chamber. It's happened twice today and I'm not a happy camper having to clean up the mess. I'm thinking about returning the unit.
A: When the "Warm" setting shuts off and there's still coffee in the pot, I just hit the Brew button to reset "warm". The coffee maker senses that brewing was completed and then goes into warm mode.
Q: Single serve side all 3 lights flashing and not brewing makes loud gurgling sound
A: Clean the puncture needle on top of the lid that punctures the k-cup it’s probably plugged. Lift the lid and take the 4 screw out, this allows you to get that top plate down and exposes the top of the needle and the rubber hose then you can take it apart and clean it. Just be careful it’s sharp.
A: I recently experienced the same issue with my SS-15. Will not brew, and the three cup-size lights are flashing on and off. Nothing that I tried would start the unit working, and I did not find any solution to this on the internet. So....I called Cuisinart customer service....and a person answered!!! They informed me that there is a "reset process" for this problem: Per Cuisinart customer service: remove water reservoir locate toggle switch on the Right side of unit flip toggle on and off for 60 seconds unplug machine for at least 10 minutes Re-attach reservoir and plug unit back in....the unit should have reset. Once unit is working, descale unit with 50/50 white vinegar and water in reservoir. (3-4 brewed cups) then flush unit out by brewing 4-6 cups of plain water. I'm in the process of trying the above solution, not finished with it yet.
A: If you are talking about the clean light on the k cup side, put a large coffee cup under the spout on the cup side. Fill reservoir with 1/3 white vinegar and 2/3 water. Hold down both of the two left buttons on the Kcup side, which are the 6 and 8 ounce buttons. Run again and again until reservoir is empty. The light should go away. Hope is worked for you. It worked for me.
A: Three flashing lights means the coffee maker overheated due to the top needle being clogged. Open the top and stick the end of a paper clip into the hole. It will clear the clog and it will work normally. This is from the owners manual and has to be done from time to time based on use.
A: We push the k-cup down as we insert, to pop the bottom. That releases the pressure and we haven't had any more problems. Hope this helps
A: It holds 40 oz of water in the single serve reservoir. Makes several cups.