DS18 Audio - IXS 10" Shallow-Mount Fiber Glass Cone Subwoofer, 600W RMS Dual 4-Ohm
Reviews coming soon
About this product
The IXS10.4D is a 10" car subwoofer from the DS18 IXS series. It handles 600 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1200 watts. The cone is fiber glass. The shallow-mount basket fits tight spaces and under-seat enclosures where a standard-depth subwoofer will not clear. Mounting requires a 9.25" cutout diameter and 3.66" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Woofer Size
10"600W RMS / 1200W Peak Power Handling
Rated at 600 watts RMS and 1200 watts peak. Behind that rating: 2.5" voice coil on an aluminum former wound with Copper wire and a 62 oz ferrite motor. That is what lets a 10" cone move this much air without losing control.
Dual 4-Ohm Voice Coil
Dual voice coils let you wire multiple subwoofers in series or parallel to reach the final impedance your amplifier is stable at, which gives you room to grow the system later.
Fiber Glass Cone
The fiber glass cone stays rigid at high excursion while resisting fatigue over time, so the driver keeps its shape and output under sustained high power.
Fitment and Recommended Enclosure
This 10" subwoofer requires a 9.25" cutout diameter and 3.66" of mounting depth. DS18 recommends a sealed enclosure of 0.5 cu ft. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.
Shallow-Mount Design for Tight Spaces
The shallow mount basket fits under seats, behind seats and in tight factory locations where a standard depth 10" subwoofer will not clear. Confirm your available mounting depth before ordering.
- RMS Power600 wattsPeak Power Handling1200 wattsImpedance4 ohmsSensitivity84 decibelsDual Voice CoilsYesWoofer Size10"
Reviews
This product doesn't have any reviews yet.
Compare similar products

The IXS10.4D is a 10" car subwoofer from the DS18 IXS series. It handles 600 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1200 watts. The cone is fiber glass. The shallow-mount basket fits tight spaces and under-seat enclosures where a standard-depth subwoofer will not clear. Mounting requires a 9.25" cutout diameter and 3.66" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

The Pioneer TS-A3000LB A Series Shallow Mount Pre Loaded Enclosure has a 12 in. subwoofer already positioned inside. Traditional subwoofer terminals are mounted horizontally or vertically. These mounts force wires to be bent to fit which can be difficult if low gauge high performance wires are used. The Pioneer shallow subwoofer’s patent-pending, angled push terminals make it easy to connect speaker wires. The straighter connection saves space and makes installation easier. And compact, space-saving dimensions make it easy to install the preloaded subwoofer enclosure in a variety of trucks—standard cab, extended cab, or crew cab.

Hook this 12-inch CompR subwoofer to 500W of power in a sealed or ported enclosure for intense power and reliability. The Spiralead tinsel emits powerful sound, while ribbed Santoprene surround produces deep, clear, chest-thumping bass notes. This CompR subwoofer has dual voice coils with 2 ohms for flexible system design. Geek Squad Installation Recommended Visit your local Best Buy store for more information.

The perfect combination of performance and value, the KICKER CompC Subwoofer delivers the bump you’ve been craving! The single-voice-coil CompC Subwoofers make wiring easy with spring-loaded terminals, for easy optimizing of a CX-Series Amplifier. Big power and big bass are easy to get.
| Pros for DS18 Audio - IXS 10" Shallow-Mount Fiber Glass Cone Subwoofer, 600W RMS Dual 4-Ohm | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | Sound Quality, Bass, Power, Price | Sound Quality |
| Cons for DS18 Audio - IXS 10" Shallow-Mount Fiber Glass Cone Subwoofer, 600W RMS Dual 4-Ohm | |||
| There were no cons for this product— | There were no cons for this product— | Durability | There were no cons for this product— |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.












































