DS18 Audio - Single 10" Loaded Sealed Subwoofer Enclosure with Built-in Amplifier, 350W RMS
Reviews coming soon
About this product
The SB10A is a loaded subwoofer enclosure with a sealed box. It comes with a 10" subwoofer already installed and wired, so you only add an amplifier — or nothing at all, since the amplifier is built in. Total power handling is 350 watts RMS and 700 watts peak. The built-in digital amplifier is matched to the subwoofer, so there is no guesswork in gain setting or impedance matching. The box has an internal volume of 12L / 0.42ft3 and a port tuned to N/A. Construction is 0.59" MDF finished in non-woven fabric. Everything is assembled and ready to drop in, which saves the cost and time of building a custom enclosure.
Woofer Size
10"Features
Real Bass Where There's No Room For It
Single-cab trucks, small coupes, tight cargo areas: the SB10A is 4.8" deep at its slimmest point and slides under or behind a seat. You get the low end that makes a system feel finished, without giving up the space a conventional box would eat.
Amplifier Already Built In and Already Matched
A 350W RMS (700W max) Class D monoblock is mounted to the enclosure and tuned to the 10" shallow sub inside. No separate amp to buy, no rack to build, no impedance math, no gain guesswork. Power, ground, signal, done.
Wires Into Any System, Factory Radio Included
High-level speaker inputs and low-level RCA inputs are both on board, so it works with a factory head unit that has no preamp outputs or with an aftermarket deck. Whichever your vehicle has, it connects.
Sealed 0.42 ft³ Box for Tight, Musical Bass
The sealed .59" MDF enclosure drops off at 48Hz and keeps the low end controlled rather than boomy. Bass notes start and stop with the music instead of smearing into one continuous rumble.
Bass Level Where You Can Reach It
Onboard low-pass filtering and level control let you blend the sub to your door speakers, so the system sounds like one system and not like a subwoofer fighting everything else.
Specifications
- RMS Power350 wattsPeak Power Handling700 wattsImpedance2 ohmsSensitivity83 decibelsDual Voice CoilsNoWoofer Size10"
Reviews
This product doesn't have any reviews yet.
Compare similar products
The SB10A is a loaded subwoofer enclosure with a sealed box. It comes with a 10" subwoofer already installed and wired, so you only add an amplifier — or nothing at all, since the amplifier is built in. Total power handling is 350 watts RMS and 700 watts peak. The built-in digital amplifier is matched to the subwoofer, so there is no guesswork in gain setting or impedance matching. The box has an internal volume of 12L / 0.42ft3 and a port tuned to N/A. Construction is 0.59" MDF finished in non-woven fabric. Everything is assembled and ready to drop in, which saves the cost and time of building a custom enclosure.
General Features: Single 10" Ported Loaded Subwoofer Enclosure with Built-In Amplifier. Power Handling: . Peak: 1200 watts. RMS: 350 watts. Built-in Class D amplifier. Includes Remote Bass Level Controller. Pre-installed Black Metal Grille. Precision-engineered CNC Ported MDF Enclosure. 8 AWG gauge power and ground wiring is recommended for installation. Works with Both Factory and Aftermarket Audio Systems. Authorized Internet Dealer. 1-year Manufacturer's Warranty. Subwoofer Features: 10" Single Voice Coil 2-Ohm Subwoofer. Injection Molded Polypropylene Cone. Rubber Surround. Ferrite Magnet Motor Structure. Frequency Response: 20 - 250 Hz. Amplifier Features: Class D Monoblock Amplifier. Low-Pass Crossover Frequency: 50 - 250 Hz. RCA Preamp Inputs. Speaker-level (high-level) inputs. Input sensitivity: 100mV - 6 volts. Removable Power Plug. Fuse Rating: 30A x 1. Enclosure Features: Preloaded Single 10" Slot Ported Enclosure. 3/4 MDF (Medium Density Fiberboard) Construction. Black Carpet with Black NVX Stitched Logo. Enclosure Dimensions: 20. 86" L x 5. 7" W x 12. 99" H.
The PU210A is a loaded subwoofer enclosure with a sealed box. It comes with 2 10" subwoofers already installed and wired, so you only add an amplifier — or nothing at all, since the amplifier is built in. Total power handling is 350 watts RMS. The built-in digital amplifier is matched to the subwoofer, so there is no guesswork in gain setting or impedance matching. The box has an internal volume of 16L / 0.56ft3. Construction is 5/8" / 15mm MDF finished in black carpet. Everything is assembled and ready to drop in, which saves the cost and time of building a custom enclosure.
The ZR112LD is a loaded subwoofer enclosure. It comes with a 12" subwoofer already installed and wired, so you only add an amplifier. Total power handling is 800 watts RMS and 1600 watts peak. The box has an internal volume of 79.3L / 2.8 ft3. Construction is 3/4" (19mm) MDF finished in black carpet. Everything is assembled and ready to drop in, which saves the cost and time of building a custom enclosure.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
Enjoy your ride Sponsored
Top Deal$408.99The price was $479.99
Keep exploring
$159.96The price was $199.95
$249.99The price was $269.95
