Powerbass - PB-1000D Mono Car Amplifier – 1000 Watts x 1 @ 1 Ohm, Class D, Compact Design, Bass Remote Included - Black/Gray
Powerbass - PB-1000D Mono Car Amplifier – 1000 Watts x 1 @ 1 Ohm, Class D, Compact Design, Bass Remote Included - Black/Gray
FREE shipping to
Specifications
- Amplifier ClassDNumber Of Channels1Bass BoostVariable
- Key Specs
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Number Of Channels: 1
- Bass Boost: Variable (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
- General
- Brand: Powerbass
- Model Number: PB-1000D
- Product Name: PowerBass PB-1000D Mono Car Amplifier – 1000 Watts x 1 @ 1 Ohm, Class D, Compact Design, Bass Remote Included
- Color: Black/Gray
- Audio Power
- Total Power Handling RMS: 1000 watts
- Total Power Handling Maximum: 2000 watts
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Audio
- Number Of Channels: 1
- Bass Boost: Variable (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
- Features
- Bluetooth Enabled: false (The device is capable of communicating with another device via Bluetooth, provided they are within the required range of each other. A Bluetooth-enabled device must also be the same Bluetooth version or higher than the accessory it is intended to pair with.)
- Marine: false
- Dimensions
- Product Height: 13.500 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 3.500 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 8.750 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 7.1 pounds (The out of box weight of the item.)
- Warranty
- Warranty - Parts: 1-Year Manufacturer Warranty
- Warranty - Labor: None
- Other
- UPC: 823871009800
Borrowing from Powerbass's former ACS series, these new amplifiers offer upgraded features, terminals and a dual layer PCB all packed in the most compact chassis allowable. To accomplish this they selected SMD parts and engineered a brand new high density heat sink engineered for maximum efficiency and cooling. The result, an all new line-up of two, four, five and mono channel models that offer amazing performance and fantastic value. Ultra efficient, the PB Series amplifiers produce plenty of low distortion high fidelity audio in a footprint small enough to fit nicely in nearly any vehicle. The PB Series Amplifiers provide the perfect mix of performance and style in a sleek new compact chassis. Features: 1,000 Watt High Efficiency Class D Design 1-OHM Stable Mono Block Amplifier MOSFET Power Supply High Level (Speaker)/Low Level (RCA) Input Remote Soft Delay Turn On/Off Circuit Variable Low Pass Electronic Crossover Selectable 12dB Bass Boost EQ Variable Gain Control Remote Level Control Port (for optional PB-GAIN1 controller) Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. Specifications: Peak Power: 2000 watts Power Supply: Unregulated PWM Inputs: RCA, 1 Pair Input, 1 Pair Speaker Level Input Dimensions (in Inches): 12.0" x 7.1" x 2.0" Depth: 12.0" Channels (mono): 1 Variable Subsonic Freq: Variable 15 Hz - 50 Hz Equalization Boost/Cut: Switchable 0/12 dB @ 45Hz Height: 2.0" Width: 7.1" Switchable Subwoofer EQ: 0 / +12 dB @ 45 Hz Subwoofer EQ Frequency: 45 Hz Variable Subwoofer EQ: Switchable 0/+12 dB Low-Pass Crossover Freq: Variable 30 Hz - 250 Hz High-Pass Crossover Freq: N/A Crossover Slope: 12 dB Input Sensitivity: 0.25 V - 6.0 V S/N Ratio: >90 dB Total Harmonic Distortion: 0.5% @ 1,000 watts Strapped Output Power @ 2ohms: N/A Output Power (14.4 V) @ 4 ohm: 400 watts x 1 Output Power (14.4 V) @ 2 ohm: 600 watts x 1 Output Power (14.4 V) @ 1 ohm: 1000 watts x 1 Frequency Response: 10 Hz - 250 Hz
- Key Feature: 1,000 Watt High Efficiency Class D Design
- Key Feature: 1-OHM Stable Mono Block Amplifier
- Key Feature: MOSFET Power Supply
- Key Feature: High Level (Speaker)/Low Level (RCA) Input
- Key Feature: Remote Soft Delay Turn On/Off Circuit
Whats Included
- PowerBass PB-1000D Mono Car Amplifier – 1000 Watts x 1 @ 1 Ohm, Class D, Compact Design, Bass Remote Included
Compare similar products
Borrowing from Powerbass's former ACS series, these new amplifiers offer upgraded features, terminals and a dual layer PCB all packed in the most compact chassis allowable. To accomplish this they selected SMD parts and engineered a brand new high density heat sink engineered for maximum efficiency and cooling. The result, an all new line-up of two, four, five and mono channel models that offer amazing performance and fantastic value. Ultra efficient, the PB Series amplifiers produce plenty of low distortion high fidelity audio in a footprint small enough to fit nicely in nearly any vehicle. The PB Series Amplifiers provide the perfect mix of performance and style in a sleek new compact chassis. Features: 1,000 Watt High Efficiency Class D Design 1-OHM Stable Mono Block Amplifier MOSFET Power Supply High Level (Speaker)/Low Level (RCA) Input Remote Soft Delay Turn On/Off Circuit Variable Low Pass Electronic Crossover Selectable 12dB Bass Boost EQ Variable Gain Control Remote Level Control Port (for optional PB-GAIN1 controller) Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. Specifications: Peak Power: 2000 watts Power Supply: Unregulated PWM Inputs: RCA, 1 Pair Input, 1 Pair Speaker Level Input Dimensions (in Inches): 12.0" x 7.1" x 2.0" Depth: 12.0" Channels (mono): 1 Variable Subsonic Freq: Variable 15 Hz - 50 Hz Equalization Boost/Cut: Switchable 0/12 dB @ 45Hz Height: 2.0" Width: 7.1" Switchable Subwoofer EQ: 0 / +12 dB @ 45 Hz Subwoofer EQ Frequency: 45 Hz Variable Subwoofer EQ: Switchable 0/+12 dB Low-Pass Crossover Freq: Variable 30 Hz - 250 Hz High-Pass Crossover Freq: N/A Crossover Slope: 12 dB Input Sensitivity: 0.25 V - 6.0 V S/N Ratio: >90 dB Total Harmonic Distortion: 0.5% @ 1,000 watts Strapped Output Power @ 2ohms: N/A Output Power (14.4 V) @ 4 ohm: 400 watts x 1 Output Power (14.4 V) @ 2 ohm: 600 watts x 1 Output Power (14.4 V) @ 1 ohm: 1000 watts x 1 Frequency Response: 10 Hz - 250 Hz
Immerse yourself in the ultimate sonic experience on the road with the MB Quart Formula 1,000-Watt 1-Ohm Stable Mono Car Audio Amplifier. This audio powerhouse delivers a staggering 1,000 watts of pure, dynamic power, transforming your vehicle into a mobile concert hall.The amplifier's low-noise preamplifier circuit and Q-Stasis Pre-Amplifier Stage ensure that your audio signals remain pristine, free from distortion, and true to the original recording. High-temperature impact-proof nickel-plated RCA inputs guarantee secure and erosion-free connections, while heavy-duty output connections provide a robust electrical pathway for seamless signal transmission. Equipped with auto turn-on functionality and DC SIGNAL SENSE, the amplifier effortlessly springs to life upon detecting incoming signals on the RCA inputs, enhancing convenience and efficiency. Take command of your sound with variable electronic crossovers and an on-board electronic equalizer, tailoring frequencies with precision to suit your speakers and subwoofers. Class Q1 (Class D) amplification technology combines efficiency with a commitment to sound quality, while FLUID-FETS output device technology efficiently produces power while faithfully reproducing audio nuances. The heavy-duty heat sink and rugged MOSFET power supply ensure optimal performance without taxing your vehicle's electrical system. With LED system protection circuitry diagnostics, you can monitor overload and speaker short protection, guaranteeing longevity. The included bass remote also allows you to fine-tune bass response from the comfort of the driver's seat. Turn every drive into a symphony with the MB Quart Formula 1,000-Watt 1-Ohm Stable Mono Car Audio Amplifier.
Street Edge amplifiers were designed to be affordable without sacrificing performance. The stripped down styling of these amplifiers allowed more resources to be dedicated to achieving solid performance with big power ratings at an affordable price point. Street Edge mono amplifiers were designed to be an affordable option to deliver big power to your subwoofer. FEATURES: • Subsonic Filter • Remote Bass Knob (MONO only) • Variable Crossovers • Extruded Aluminum Heatsink SPECIFICATIONS RMS POWER 4Ω: 160 x 1 RMS POWER 2Ω: 250 x 1 THD% 4Ω: <1% FREQ RESPONSE: 10Hz – 400Hz DIMENSIONS L xW x H: 9.76 x 8.07 x 2 INPUT RANGE: 200mV – 6V AMP KIT: 8GKIT
Experience clear and powerful sound with this Hifonics ALPHA Super D-Class hybrid amplifier. An electronic crossover allows for total control over the sound sent to each individual speaker, while bass boost and bass equalizer provide a strong yet clear low end. This Hifonics ALPHA Super D-Class hybrid amplifier boasts five channels for versatility.
Specs
Reviews
This product doesn't have any reviews yet.
