sE Electronics - sE7 Small Diaphragm Cardioid Condenser Microphone with Clip SE7-U
FREE shipping to
Related Item
About This Item
- Key Specs
- Microphone Type: Condenser microphones
- Wireless: false
- General
- Brand: sE Electronics
- Model Number: SE7-U
- Product Name: sE7 Small Diaphragm Cardioid Condenser Microphone with Clip SE7-U
- Dimensions
- Product Length: 4.72 inches (The out of box length of the item. Length is measured as the longest dimension of the item.)
- Product Width: 0.91 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Features
- Microphone Type: Condenser microphones
- Wireless: false
- Lighting Type: None
- Warranty
- Warranty - Parts: Full Manufacturers Warranty
- Warranty - Labor: Full Manufacturers Warranty
- Other
- UPC: 819032011539
sE Electronics sE7. A compact & classy condenser. The sE7 is a high-quality back-electret small-diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond. Product Highlights: Optimized acoustic design, discrete class-A circuitry and a transformerless output. Clear, natural sound quality at all frequencies. Switchable -20dB attenuation pad. High sound pressure level (SPL) handling capability. Switchable low-cut 80 Hz filter. Extremely low-noise components. Product Features: High-quality Condenser Capsule. The sE7’s specialized capsule is designed for natural, balanced sound quality, with an ultra-thin diaphragm for excellent transient response. Its cardioid polar pattern also makes it ideal for most studio or stage applications, delivering great sound for almost any source. The Quietest Pencil Mic in Its Class. With a very short signal path and state-of-the-art electronics, the sE7 is the quietest microphone in its class. The transformerless design ensures pristine sound quality, reproducing instruments with excellent clarity and depth. Switchable Pre-attenuation pad. The switchable -20dB attenuation pad prevents overloading your preamp or mixer and provides extended dynamic range, enabling close-mic techniques for even the loudest sources like brass instruments and snare drums. Switchable Low-cut Filter. The integrated 80Hz low-cut filter helps to eliminate low-frequency rumble or footfall noise, or to compensate for excessive bass (proximity effect) with close-mic techniques. Built Like a Tank. The sE7’s all-metal chassis provides efficient rejection of any electrical interference and noise, and its high-quality finish ensures a great look for years to come, and the gold-plated XLR connector ensures a loss-free, reliable signal for years of demanding use. Recommended Use. Acoustic guitar, choir, orchestral + strings, piano, woodwinds, drums, percussion, cymbals / OH. Product Specifications: Components. Capsule: 1 / 2" Back-electret condenser capsule. Power. Electrical Impedance: <200 Ohms. Recommended Load Impedance: >1k Ohms. Connectivity: 3-pin male XLR connector. Powering: 48V Phantom Power (P48 according to IEC 61938). Sound. Polar Patterns: Cardioid. Frequency Range: 20 Hz - 20 kHz. Sensitivity: 19 mV / Pa (-35 dBV). Max SPL: 136 / 156 dB (0 / 20 dB attenuation pad). Equivalent Noise Level: 16 dB. Dynamic Range: 120 / 140 dB (0 / 20 dB attenuation pad). Signal to Noise Ratio: 78 dB. Low-cut Filter: 80 Hz, 6 dB / Oct, switchable. Attenuation Pad: 20 dB, switchable. Current Consumption: 3.0 mA. Dimensions. Mic Diameter: 23 mm (0.91 in.). Mic Length: 120 mm (4.72 in.). Mic Weight: 128 g (4.52 oz.)
- Switchable Pre-attenuation pad: The switchable -20dB attenuation pad prevents overloading your preamp or mixer and provides extended dynamic range, enabling close-mic techniques for even the loudest sources like brass instruments and snare drums.
Whats Included
- sE Electronics sE7 Microphone|Mic Clip (with Thread Adapter)|Wind Screen
Reviews
This product doesn't have any reviews yet.
Compare similar products
sE Electronics sE7. A compact & classy condenser. The sE7 is a high-quality back-electret small-diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond. Product Highlights: Optimized acoustic design, discrete class-A circuitry and a transformerless output. Clear, natural sound quality at all frequencies. Switchable -20dB attenuation pad. High sound pressure level (SPL) handling capability. Switchable low-cut 80 Hz filter. Extremely low-noise components. Product Features: High-quality Condenser Capsule. The sE7’s specialized capsule is designed for natural, balanced sound quality, with an ultra-thin diaphragm for excellent transient response. Its cardioid polar pattern also makes it ideal for most studio or stage applications, delivering great sound for almost any source. The Quietest Pencil Mic in Its Class. With a very short signal path and state-of-the-art electronics, the sE7 is the quietest microphone in its class. The transformerless design ensures pristine sound quality, reproducing instruments with excellent clarity and depth. Switchable Pre-attenuation pad. The switchable -20dB attenuation pad prevents overloading your preamp or mixer and provides extended dynamic range, enabling close-mic techniques for even the loudest sources like brass instruments and snare drums. Switchable Low-cut Filter. The integrated 80Hz low-cut filter helps to eliminate low-frequency rumble or footfall noise, or to compensate for excessive bass (proximity effect) with close-mic techniques. Built Like a Tank. The sE7’s all-metal chassis provides efficient rejection of any electrical interference and noise, and its high-quality finish ensures a great look for years to come, and the gold-plated XLR connector ensures a loss-free, reliable signal for years of demanding use. Recommended Use. Acoustic guitar, choir, orchestral + strings, piano, woodwinds, drums, percussion, cymbals / OH. Product Specifications: Components. Capsule: 1 / 2" Back-electret condenser capsule. Power. Electrical Impedance: 1k Ohms. Connectivity: 3-pin male XLR connector. Powering: 48V Phantom Power (P48 according to IEC 61938). Sound. Polar Patterns: Cardioid. Frequency Range: 20 Hz - 20 kHz. Sensitivity: 19 mV / Pa (-35 dBV). Max SPL: 136 / 156 dB (0 / 20 dB attenuation pad). Equivalent Noise Level: 16 dB. Dynamic Range: 120 / 140 dB (0 / 20 dB attenuation pad). Signal to Noise Ratio: 78 dB. Low-cut Filter: 80 Hz, 6 dB / Oct, switchable. Attenuation Pad: 20 dB, switchable. Current Consumption: 3.0 mA. Dimensions. Mic Diameter: 23 mm (0.91 in.). Mic Length: 120 mm (4.72 in.). Mic Weight: 128 g (4.52 oz.)
sE Electronics T2. Titanium makes the difference. The T2 appeals with its down-to-earth elegance, offering discrete electronics prioritizing the features you really need. With titanium being much stiffer and three times lighter than gold, your transients will never be the same. Product Highlights: Hand-crafted titanium-sputtered true condenser capsule. Accurate definition and fast transient response. Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid. Innovative close-miking shockmount. 40 / 80 Hz bass-cut filters and -10 / -20 dB pads. Available in a matched-pair configuration. Product Features: Hand-crafted 1" Titanium-sputtered True Condenser Capsule. The T2’s titanium-sputtered capsule is much stiffer and three times lighter than gold, giving it a quicker transient response than gold-sputtered capsules, which is essential when recording instruments that have fast attack - like drums and percussion - to maintain clarity and deliver exceptionally accurate performance. Free of Thrills, No LEDs. No Plastic Switches. Select between 4 polar patterns with metal switches, from cardioid to omnidirectional or figure-eight to hypercardioid, with a gold-sputtered, dual-diaphragm capsule for precision-based miking techniques to minimize signal bleed from unwanted sources in demanding studio or fast-paced live environments. Dent-proof Metal Housing & Premium Finish. Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille, the T2 is built to last for years of demanding studio use and the day-to-day life of a touring artist. Switchable Pre-attenuation Pad & Bass-cut Filter. Select between two pre-attenuation pads for an extended dynamic range and compensate for loud vocals, guitars, drums, and brass instruments. With two low-cut filters, easily tame excessive low-frequency rumble and proximity effect and efficiently adjust for close-miking techniques. Available as a Matched Stereo-pair. Each T2 Matched-Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two T2 microphones. Recommended Use. Drums, percussion, overheads, hi-hats, orchestral + strings, piano, bass guitar cab, acoustic guitar, electric guitar cab, vocals, woodwinds, brass. Product Specifications: Components. Capsule: Hand-crafted 1" true condenser capsule. Diaphragm: Titanium-sputtered mylar. Power. Electrical Impedance: 22 Ohms. Connectivity: 3-pin male XLR connector. Powering: 48 Volts according to IEC 61938. Sound. Polar Patterns: Cardioid, Hypercardioid, Omni-directional, Figure-8. Frequency Range: 20 Hz - 20 kHz. Sensitivity: 25 mV / Pa (-32 dBV). Max SPL: 137 / 147 / 157 dBSPL (0/10/20 dB Attenuation pad - 0.5% THD). Equivalent Noise Level: 13 dB(A). Signal to Noise Ratio: 81 dB. Low-cut Filter: 40 / 80 Hz, 6 dB/Oct, switchable. Attenuation Pad: 10 / 20 dB, switchable. Dimensions. Mic Weight: 290 g (10.23 oz.). Mic Length: 146 mm (5.75 in.). Mic Width: 58 mm (2.32 in.). Mic Diameter: 29 mm (1.10 in.)
Description: Elevate your podcasting or streaming setup with our professional podcast equipment bundle. This all-in-one podcast bundle ensures crystal-clear audio with a high-quality condenser microphone and a dual-intelligent DSP sound chipset, perfect for capturing every nuance of your voice. Customize your broadcasts with the voice-changing sound card, offering four voice variants and 10 cool audio effects. The adjustable suspension arm and included accessories ensure seamless setup and operation. Compatible with Windows, Mac OS, Android, iOS, and gaming platforms, this kit is versatile and ready for any environment. Features: ADJUSTABLE BOOM ARM- Securely clamp the boom arm to your desktop with the sturdy C clamp, allowing 180-degree free adjustment to find the perfect position for your podcasting and streaming setup. SHOCK MOUNT- The professional suspension shock mount effectively isolates the condenser microphone from the desk, significantly reducing vibrations for a smoother recording experience. MIC POP FILTER- Featuring a double-layer design, the pop filter efficiently minimizes plosives, wind interference, and saliva spray during recording, live streaming, or broadcasting, ensuring superior sound quality. DESKTOP MOUNTING BRACKET- The clamp firmly anchors the stand to your desk, providing a stable and reliable foundation for your live streaming sessions. Podcast Equipment Bundle Specification : Color - Black Mic - Condenser Pickup - Cardioid Mic Connection - XLR Chipset Type - DSP Frequency Range - 20 hz to 20 khz Noise Level - 16 dB Frequency Response - 20000 Hz Arm stand - Adjustable Numbers of sound effects - 10 voice variants - female, male, child, monster Foam - High Density Foam Cover No. of layer in pop filter - Two Package Information: 1x condenser microphone 1x adjustable suspension scissor arm stand 1x live sound card 1x shock mount 1x pop filter 1x windscreen 1x XLR cord 1x headphone 1x USB-to-Type C cord 2x 3.5-mm cord
Based on the bestselling BP40 broadcast microphone, the AT2040 features a multistage windscreen with a nonwoven filter and high-quality foam mesh that provides excellent pop and hiss filtration. The integrated shock mount prevents unwanted noise and vibration that can be passed through even the best tripods and boom arms.
