Skullcandy - Indy True Wireless In-Ear Headphones - Green/Sage/Pastels
- Key Specs
- Sound Mode: Stereo
- Connection Type: Wireless
- Wireless Connectivity: Bluetooth (The manner in which a device sends data to another device over a short distance without the use of wires or cables.)
- True Wireless: true (These headphones not only lack wires between the device and headphones, they also lack wires between the headphones themselves. (true wireless is really only possible with in-ear headphones))
- Water Resistant: true (Resists some degree of water penetration.)
- Built-In Microphone: true
- Headphone Fit: In-Ear
- Battery Life: 16 hours (Battery life will vary depending on the product configuration, product model, applications loaded on the product, power management setting of the product and the product features used by the customer. As with all batteries, the maximum capacity of this battery will decrease with time and usage.)
- General
- Brand: Skullcandy
- Model Number: S2SSW-M692
- Product Name: Indy True Wireless In-Ear Headphones
- Color: Green/Sage/Pastels
- Ear Cushions: true
- Audio
- Sound Isolating: false
- Minimum Frequency Response: 20 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 20 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Impedance: 16 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Total Harmonic Distortion: 3 percent (Measurement of the harmonic sound distortion. The lower the percentage, the cleaner the sound.)
- Sound Mode: Stereo
- Driver Size: 6 millimeters
- Connectivity
- Connection Type: Wireless
- Wireless Connectivity: Bluetooth (The manner in which a device sends data to another device over a short distance without the use of wires or cables.)
- True Wireless: true (These headphones not only lack wires between the device and headphones, they also lack wires between the headphones themselves. (true wireless is really only possible with in-ear headphones))
- Bluetooth Version: Other (The Bluetooth specification formalized by the Bluetooth Special Interest Group. All versions of the Bluetooth standard are backwards compatible with previous versions.)
- Features
- Water Resistant: true (Resists some degree of water penetration.)
- Built-In Microphone: true
- Controls: Call, Track selection, Volume
- Maximum Talk Time: 16 hours
- Design
- Headphone Fit: In-Ear
- Power
- Rechargeable: true
- Battery Life: 16 hours (Battery life will vary depending on the product configuration, product model, applications loaded on the product, power management setting of the product and the product features used by the customer. As with all batteries, the maximum capacity of this battery will decrease with time and usage.)
- Charging Accessory Included: Cable
- Charging Interface(s): Micro-USB (The connection for transmitting power to charge the device.)
- Other
- UPC: 878615098879
Power through your day with up to 16 hours of premium sound with these mint Skullcandy Indy true wireless in-ear earphones. The sound profile delivers balanced audio without distortion for a better listening experience, while touch controls let you change songs and manage calls by intuitively tapping on the buds. These Skullcandy Indy true wireless in-ear earphones resist sweat, water and dust for durable use.
- Truly-wireless earphones: Let you listen to your favorite tracks, so you won't be held back by wires.
- Rechargeable battery: Offers up to 16 hours of use on a charge.
- Water- and sweat-resistant: Helps prevent sweat and water from entering the earphones.
- Built-in microphone: Enables simple hands-free chatting via a compatible device.
- Bluetooth 5.0 interface: Enables simple wireless pairing with your Bluetooth-enabled device.
- In-ear design: Fits securely and directs music into your ears for full, uninterrupted audio.
- Headset controls: Include volume control, answer/end, play/pause and next/previous track.
- 6mm drivers: Deliver powerful sound.
- 20Hz - 20kHz frequency response: For faithful sound reproduction.
- 16 ohms impedance: To efficiently conduct power.
- Stereo design: Delivers crisp tones.
- Truly-wireless earphones: Let you listen to your favorite tracks, so you won't be held back by wires.
- Rechargeable battery: Offers up to 16 hours of use on a charge.
- Water- and sweat-resistant: Helps prevent sweat and water from entering the earphones.
- Built-in microphone: Enables simple hands-free chatting via a compatible device.
- Bluetooth 5.0 interface: Enables simple wireless pairing with your Bluetooth-enabled device.
- In-ear design: Fits securely and directs music into your ears for full, uninterrupted audio.
- Headset controls: Include volume control, answer/end, play/pause and next/previous track.
- 6mm drivers: Deliver powerful sound.
- 20Hz - 20kHz frequency response: For faithful sound reproduction.
- 16 ohms impedance: To efficiently conduct power.
- Stereo design: Delivers crisp tones.
Whats Included
- Skullcandy Indy
- Charging case, 3 pairs of EarGels, micro-USB charging cable, stability gels (large)
- Skullcandy Indy
- Charging case, 3 pairs of EarGels, micro-USB charging cable, stability gels (large)
Product Manuals
Q: How do you pair the right with the left on Skullcandy Indy wireless earbuds
A: The 4X tap method did not work for me at all. Using the other method of resetting the earbuds work though. - Remove indy fuel from your bluetooth device list and turn off bluetooth from your phone. -Manually turn off the buds by holding them for 6 seconds while in your ear so you are sure that they have indeed turned off. -While both are off, hold both of them for ten seconds preferably while wearing them so you can hear them turn on, attempts to pair and then shutdown again. - Replace ear buds in the case to and close lid, then remove and place to your ear. - The buds will automatically turn on and you should hear "Pairing". - Turn on your blue tooth Good luck!
A: Mine let me use they right by itself while the left one is in the case.
Q: With this work with any Bluetooth Version?
A: The Indy wireless earbuds feature Bluetooth 5.0 which is backwards compatible. Keep in mind that the wireless range will match the source of your audio. For Example: If you're actually connected with Bluetooth 4.2, you will only have a wireless range of about 33 feet.
A: I had that problem after using them a while. I watched the Skullcandy videos on YouTube and still had the problem. I went to the Skullcandy website and emailed them. They responded within 24 hours. They sent me these directions: 1.) Place your Indy earbuds in the charging case. 2.) Remove Indy from your device’s paired list. 3.) Turn off Bluetooth mode on your device (mobile or computer) 4.) Power on only your right Indy earbud by removing it from the case. It will be in a non-connected state at this point. 5.) Tap the center of the earbud 4x. This will automatically power off the earbud and reset it. You will know this was successful when the light on the earbud turns red. If the 6.) light does not turn red please repeat step 5 until the light turns red. Place the right earbud back in the case. 7.) Now repeat those same steps only with the left earbud. (steps 4 and 5) 8.) Next, remove both earbuds from the case to have them automatically power on and begin pairing to one another. 9.) You’ll hear one beep indicating the buds have paired together, and then a voice prompt that will notify you that Indy is now “Pairing”, meaning it’s searching for your device. 10.) At this point, turn your device’s Bluetooth mode back on and re-pair to Indy. For additional support, feel free to watch this video: https://youtu.be/A-247Tr2e-l I had to repeat Step 5 two or three times for my left earbud before the light turned red. If the instructions don't work for you, you can contact Skullcandy at their website: https://contact.skullcandy.com/
A: Unfortunately, the right earbud is the master earbud and the only one that can be used solo. However, you can get a new pair for a discounted price with our Fearless Use program. Please visit https://info.skullcandy.com/Support?Dest=hc%2Fen-us%2Farticles%2F360014151974-Fearless-Use-Promise for more information.
Q: Do they have ambient sound like airpods or the Samsung
A: No, they isolate the sound but that is what I was looking for when I got these. I wanted them to block out background noise. The JLab Audio - JBuds Air Sport True Wireless In-Ear Headphones have a great ambient noise feature on them. You can actually turn it off and on but the sound quality is no where near as good as the Skull Candy Indys.
A: No the Indy true wireless earbuds do not. They only connect to one device at a time. The next generation of the Indy true wireless earbuds will be able to do that function.
Q: Will my skullcandy Indy buds be able to connect with the Apple Watch? If so, then how?
A: Yes it can (FYI I have a series 3). Just make sure that it won’t connect to your phone because it can only be connected to one. Just go to settings and Bluetooth and connect
