Bowers & Wilkins - M1 Speaker Stands (2-Pack) - Black

The Bowers & Wilkins FS-M-1 stands are elegant and stylish. They are a lot heavier than the look, the base is extremely heavy. The upright is aluminum which is great for weight however makes it easier for the metal screws to wear out the aluminum. The design is great, however the connection between the speaker and stand can be a bit finicky. I discovered depending on how much they are tightened with the recessed screw the speaker can go on and off easily. I had the leave music playing while I tightened it because I initially tightened it and once I used my receiver microphone to configure my speakers once I got to the rear surround speaker I constantly recessed no sound I would recommend double checking your box once received. I received 2 open boxes before the 3rd was a new unopened box. These speakers as you may or may not know, will only work with this stand.

super functional I use them for the back of my home theater without them I couldn't put my speakers I don't have a wall behind 10 points you can't see the cables either super nice

Overpriced, but you knew that just from the B&W name. These work as expected, but the directions are a little sub-par regarding the plastic piece in the top of the stand and the setting of the speaker into the plastic piece to mount the speaker to the stand. There's a small diameter, long set screw in the tube of the stand - I needed to loosen it up to permit the plastic piece to be more easily withdrawn/re-inserted (speaker wire electrically connects to terminals on the bottom of the plastic piece so it must be removed). Also,when inserting the speaker, you need to press the button on the plastic piece that extends through the tube of the stand. This reminds me that feeding the wire through the stand is a pain - it should have been pre-wired so that you connect to the stand with banana connectors.

they are expensive, but with that said. It is built well and the stand bases are very heavy which give it sturdiness. I also like the clean integration of the speaker wire down the neck of the stand, all in all very well designed/built.

Stands are mostly pretty good. Bought my stands brand new but I’d be shocked if one of the stands had not been used before. One of the screws that tightens the speaker in position was missing the rubber end and wouldn’t tighten. I’ve read reviews that the connection is difficult and that the connectors aren’t marked. I didn’t experience either of those. But, if you are looking for simple straight forward easy setup, this may not be the best option. Works great as my surrounds.