Insignia™ - PLA 1.75mm Filament - White

PLA filament is the easiest to use and serves as one of the most popular for those just getting into 3D Printing. This Insignia brand filament prints very well at the Bamboo branded temperatures with ease. It does not come on a plastic spool, instead on a cardboard spool. This roll can be easily transitioned to a reusable plastic spool if needed. This is the ideal filament type if you are looking to make quick projects and prototypes. The filament size is the same as others sitting around 1.75mm, it passed the flex testing to make sure it was not too brittle before use. Initial setup is the same as your Bamboo setup for install, cleaning when changing colors, and coil bleed offs during use. Overall print quality is the same as others that I have tried and all prints have been successful with your standard shrinkage and slight changes that would normally need to be accounted for. Overall the Insignia filament provided great reproduction details and layer adhesion while it did not stick heavily to the print bed making it easily removed from the print bed. The selection of colors available makes it a good buy at the price Best Buy has it listed for everyday printing projects.

I usually dread buying cheap white filament because the heavy pigment they use to make it opaque often makes it print rough, clumpy, or brittle. However, Insignia White PLA completely shattered those expectations. It is the ultimate low-maintenance workhorse that sits quietly in your dry box until you need a painless, high-quality print. I loaded the spool onto my Bambu Lab P2S and ran my test Benchies and calibration blocks using the standard "Generic PLA" profile in Bambu Studio. I skipped the manual calibrations entirely to see if it would fail at high speeds, but the printer chewed right through it. The surface finish is surprisingly smooth, with crisp overhangs and fantastic layer cohesion on the PEI bed. It easily gives Bambu's proprietary Basic PLA a run for its money. You get that same seamless, plug-and-play experience without the premium price tag, resulting in a bright, clean white that doesn't look cheap or translucent. If you need a reliable, budget-friendly white PLA for everyday printing, this spool is an absolute no-brainer.

Bottom Line: Insignia's PLA 1.75mm Filament offers reliable, hassle free printing. Pros: works as it should; well-labeled; cardboard spool Cons: none Review: Out of the box, Insignia's white PLA filament delivered a flawless print on my Elegoo Neptune 4 Max. My first print was a shelf stand (my bookcase is also white), which uses a honeycomb design for the top, four legs, and a brace on each leg. Using default PLA settings for nozzle and print bed temperatures and default speed settings (e.g., 0.2mm layer height, 15% infill, etc.), the print took about 6 hours to complete. One of the other things I really like about Insignia's filament is that both the box and spool are well-labeled. The back of the box provides a comparison table of different types of filaments and the settings that should be used for each type. The spool itself is also well-labeled, which also indicates what filament it is and the print settings. Additionally, the spool is made of cardboard, which is more environmentally friendly to dispose of than plastic ones.

It works fine in my Bambu mini, i like the color and the quality is onpoint

So far this has been good value for the money. We have made quality items, juat need more xolors now.