Pros: Beautiful design, RGB fan adapter is nice!, easy to build in. Cons: expensive, airflow is okay.

I really like the looks of this case, building inside of it is straight forward and the back of the case gives you space to hide cables, though with high power components it gets very dusty inside,

Great looking case, good RBG, alright airflow, and good amount of space! My experience: I am not a big fan of the front intake design, howevever I have zero thermal issues (5600X w/ 280mm AIO, ASUS GTX1070) so I cannot complain. In fact, everything runs really cool. 60's on the GPU and 40's on CPU while gaming. Even under full load, I am well below the thermal limit on the 5600X. Removing the dust filters for the front fans will help the flow a bit. One of my front fans RGB was haywire out of the box. However, NZXT shipped a new one to me no charge. It just took awhile to prove to them it was the fan RGB itself and for supply to come in. Notes: (These may be obvious to some, but I will cover them anyway) If you are looking to put a really big GPU in here (close to spec max GPU length), you will not be able to run an AIO bigger than 140mm. For front mounted AIO's, you should ideally mount hoses down, and this limits your GPU space down from the spec aside from the radiator thickness. I would recommend a good air cooler with this case if you have a large 3 fan GPU. Also, AIO placement is limited. Unless you have a smaller 120/140mm AIO, the front is your only option. Top mounted AIO as exhaust is best, in my opinion, so you have max GPU room and the pump is the lowest point in the system. So, I wish I could top mount my 280mm, but in the front it works flawless and still enough room for my 2 fan 1070. Overall, not too bulky and keeps my 5600x and ASUS GTX1070 plenty cool all while looking good doing it. Only thing I wish it had was 240/280mm radiator support up top, and more front airflow. As my build keeps slowly evolving, I will one day end up moving to something with more airflow, space, and radiatior mounting options. For my current setup, it works awesome! No regrets!

I had an old full tower case. I was looking for something modern, with window, smaller and could still be a future ITX build but support my existing ATX. RGB stuff was a bonus. I like the cable management and 4 included fans for this model. I actually pulled the rear 120mm out for my 120 closed liop with push/pull fans. There was not room on top location for it. I could have pulled one of the front ones out but back worked fine. I like the final cleanliness of the inside. Would definately recommend. Pictures are with glass protextors still on.

Beautiful case, easy to work in. A definite looker compared to my original s340. The AER fans perform exceptionally and also comes with a 120mm in the rear & 140mm exhaust on top. The tempered glass on the front just pieces this entire case together. Definitely don’t regret this purchase. CAM I can now say is at a stage as to where I’ve had no from when I first bought the case and turned it on. Everything works as it should. Cooling is nominal and the smart controller keeps everything as it should with a respectable noise level.