“I have a cut out in my kitchen to put a microwave oven. With this over the range microwave convection oven, what issues might I have to install or ventilate it.”
Answer This Question
1-2 of 2 Answers
The install is straight forward, no gotcha issues, there is a plate that mounts to the wall behind the microwave that has a lip on the bottom of the plate. Once the plate is installed on the wall the back of the microwave has a lip that will connect with the lip on the plate so you install it with the front are a downward angle then rotate the microwave upward to the bottom of the cabinet above it. You have drilled holes for the three mounting screws to go through the bottom floor of the cabinet and a larger holt for the plug and cord to fit through so you can plug the microwave into the 110 volt electric receptacle that powers the microwave. The unit does weigh just over 50 pounds so pull out your range so you can lift the microwave into place and have a help to insert the top mounting screws and pull the plug through its hole so it does not get pinched.
Sorry, there was a problem. Please try again later.Hi Nicky. Thank you for your question. For Model:HMV8053U, it can be vented through the roof, wall or through room venting. We do recommend a clearance of 33" to 36" above the range. Here is the link to the Spec Page: https://media3.bosch-home.com/Documents/MCDOC02290824_HMV8053U.pdf and the Installation Manual: https://media3.bosch-home.com/Documents/9001382732_A.pdf
Sorry, there was a problem. Please try again later.