1-1 of 1 Answer
Good day, valued consumer! If your Frigidaire Gallery 20.0 Cu. Ft. French Door Standard‑Depth Refrigerator with Internal Water Dispenser doesn’t fit through the doorway or in the space once it’s delivered, here’s what you should do based on standard delivery and installation guidance: 1. Check Your Measurements Before Installation Before delivery, measure the height, width, and depth of both the space in your kitchen and the path the fridge must travel (doorways, halls, corners). Fridge dimensions for this model are approximately: - Height: ~68 7/10 inches - Width: ~30 inches - Depth with handles: ~33 3/10 inches 2. Delivery Team Can Assist (Often Included) - Remove doors or handles if needed (and if it’s allowed by your retailer/fridge spec) to help get the fridge into place. - Attempt different angles and use proper tools to get the unit through the access points safely. If they can’t get it in, they’ll usually stop rather than force it and cause damage. 3. Retailer Return / Exchange Policies If the fridge truly cannot be delivered to your space because it’s too large even with adjustments: - Most major appliance retailers (Best Buy, Home Depot, etc.) offer returns or exchanges for undeliverable appliances that don’t fit. This is typically covered under their delivery & return policy rather than the manufacturer's manual. - You’ll generally need to: • Contact the retailer’s customer service soon after the delivery attempt • Provide photos or notes from the delivery team explaining why it didn’t fit • Ask for an exchange for a smaller model or a refund Tips to Avoid Fit Problems - Measure doors and hallways with trim and molding included. Sometimes, the fridge will fit through the space theoretically, based on boxed specs, but not with knobs, handles, or trim. - Ask delivery to remove fridge doors or handles if your retailer allows it. This can make a big difference, so the fridge fits even if moments before it seemed too big. - Maico
Sorry, there was a problem. Please try again later.