“Our GE 5.0 cu. ft. self -cleaning freestanding Gas range model # jgb660sejss. Our stove that is still under the 3 yr warranty has suddenly started to keep clicking when you turn on a burner, all of the burner start clicking and will not go off.......”
Answer This Question
1-1 of 1 Answer
Hi — Beachtown94924 - Thanks for reaching out to us regarding your GE Gas Range Model # jgb660sejss. We can certainly understand your concern with the clicking burners and glad to help. Most ignition-related issues are because the burner head gets clogged after cleaning or after spillovers. If the cooktop or burners were recently cleaned, there could be moisture in the burner head ignition port (hole) and flame ports. The burner will continuously click and will not ignite until the ports are clear and the burner dries out. Before cleaning, disconnect power to the range or cooktop. After cleaning the burner heads and caps, shake out excess water and let them dry out thoroughly by air drying or by setting in a warm oven for 30 minutes. Once dry, replace the burners to their correct position, plug in the unit and try lighting the burners again. It can take up to 10-12 clicks to ignite a burner. Take a look at the following links - GAS BURNERS - COMMON CAUSES FOR SLOW OR NO IGNITION, BURNERS CLICKING: https://products.geappliances.com/appliance/gea-support-search-content?contentId=17827 - GAS RANGE OR COOKTOP - ONE OR MORE BURNERS ARE CLICKING: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16936 - A qualified GE service technician is required for an accurate diagnosis. To schedule service online, visit us at GEAppliances.com or call 1.800.GE.CARES (800.432.2737). Please have your serial number and your model number available when calling for service. Wee hope the issue has been resolved. Keep in touch at GEAppliances.com. Sue
Sorry, there was a problem. Please try again later.