1-2 of 2 Answers
Looking at the front it is 16-1/2 inches wide, but there is a small tab on the bottom right side for lifting which sticks out about 1/4 inch more. The paper tray pulls out from the bottom front and you need to grab the tray on both sides, so you will need finger clearance about 1-1/2 inches back. It is 16-1/4 inches deep but you need about 1/2 inch clearance in back so you don't bend the wires too much. It is 13-1/8 inches high but you will need a few inches clearance above to access the document feeder.
Sorry, there was a problem. Please try again later.This printer dimensions are 13.2 inches height and 16.5 inches width
Sorry, there was a problem. Please try again later.
